Ethernet card problems/errors...
Stephen Frost (sfrost@ns.snowman.net)
Mon, 2 Aug 1999 03:29:49 -0400 (EDT)
Aug 1 21:47:42 kernel: eth1: Transmit timed out: status 0090 0000 at 108661/108677 command 00030000.
Aug 1 21:48:17 last message repeated 7 times
Aug 1 21:49:22 last message repeated 13 times
Aug 1 21:49:47 last message repeated 5 times
Aug 1 21:52:25 kernel: eth0: 3Com 3c905 Boomerang 100baseTx at 0xff00, 00:10:4b:24:67:59, IRQ 17
Aug 1 21:52:25 kernel: 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
Aug 1 21:52:25 kernel: MII transceiver found at address 24, status 786f.
Aug 1 21:52:25 kernel: Enabling bus-master transmits and whole-frame receives.
Aug 1 21:52:25 kernel: eth1: Intel EtherExpress Pro 10/100 at 0xff40, 00:A0:C9:60:53:B8, IRQ 18.
Aug 1 21:52:25 kernel: Board assembly 645520-034, Physical connectors present: RJ45
Aug 1 21:52:25 kernel: Primary interface chip DP83840 PHY #1.
Aug 1 21:52:25 kernel: DP83840 specific setup, setting register 23 to 8462.
Aug 1 21:52:25 kernel: General self-test: passed.
Aug 1 21:52:25 kernel: Serial sub-system self-test: passed.
Aug 1 21:52:25 kernel: Internal registers self-test: passed.
Aug 1 21:52:25 kernel: ROM checksum self-test: passed (0x49caa8d6).
Aug 1 21:52:25 kernel: Receiver lock-up workaround activated.
===# cat /proc/interrupts
CPU0 CPU1
0: 47935 0 XT-PIC timer
1: 7 1 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 2 0 IO-APIC-edge rtc
13: 1 0 XT-PIC fpu
14: 754 1520 IO-APIC-edge ide0
17: 2853 3753 IO-APIC-level eth0
18: 349 586 IO-APIC-level Intel EtherExpress Pro 10/100 Ethernet
NMI: 0
ERR: 0
Dual proc PPro 166 w/ Intel MB (Onboard ethernet and such), I realize this isn't the
best bug report in the world, feel free to drop me an email for more info and/or suggestions.
It's a pretty simple setup....
Stephen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/