I would like to help in trouble shoot, pls tell me what to do.My
network card ( 1 x 3c509 and a 3c905 ) can be initialized and
recognized properly as indicate in the boot message. I had 2 machine
falling into the same problem with ac11 ( one compile with egcs and
the other with gcc )
A ping to its own ip is o.k but not to other machines. I even try the
latest 3c59x drivers ( .99L ? ) from donald becker's but the problem
still remains.
A look in ifconfig shows that there are tx and rx packets around (
maybe due to the ping ) but it just couldn't ping out. Everything
seems setup ok as compare to the other machine ( the routing table ).
I actually had a oops when I compile second time without the
firewalls options but it does not response to the alt+sysrq
combination. it seems to stop during init setting up the routing.
anyway, I'll try to reproduce it tomorrow and hopefully with more
details to furnish.
thanks
best regards
- ----- Original Message -----
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: Riley Williams <rhw@MemAlpha.CX>
Cc: <pgohbk@murata.com.sg>; <linux-kernel@vger.rutgers.edu>
Sent: Monday, July 19, 1999 5:19 PM
Subject: Re: network problems with 2.2.10-ac11
> > The other system has an ISA-bus NE2k clone card, and that isn't
> > even detected with 2.2.10 - it just doesn't want to know.
>
> Chuck some printk calls in the driver and see why. I cannot see any
> obvious reason for the problem.
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-kernel" in the body of a message to
> majordomo@vger.rutgers.edu Please read the FAQ at
> http://www.tux.org/lkml/
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com>
iQA/AwUBN5KGF6xm4FeZfGJyEQLUYQCg3YMvAw3eZQhhqyID9AhAEdhWstgAn0tB
0l3wSCdEbtsgI1wc7Qo01zmR
=MgWC
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/