Right. I even saw it. < Brain? Hello, encage! >
I have RAID code from Ingo, plus I tried to insert RTH's d-axp-2210.gz,
but that one seemed to be included in the final 2.2.10.
Adaptec controller info:
$ cat /proc/scsi/aic7xxx/0
Adaptec AIC7xxx driver version: 5.1.17/3.2.4
Compile Options:
TCQ Enabled By Default : Enabled
AIC7XXX_PROC_STATS : Enabled
AIC7XXX_RESET_DELAY : 5
Adapter Configuration:
SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
Ultra Wide Controller
Programmed I/O Base: 9800
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 40
SCBs: Active 0, Max Active 3,
Allocated 21, HW 16, Page 255
Interrupts: 97575
BIOS Control Word: 0x0014
Adapter Control Word: 0x005e
Extended Translation: Disabled
Disconnect Enable Flags: 0xffe0
Ultra Enable Flags: 0x0046
Tag Queue Enable Flags: 0x0040
Ordered Queue Tag Flags: 0x0040
Default Tag Queue Depth: 8
Tagged Queue By Device array for aic7xxx host instance 0:
{0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}
Actual queue depth per device for aic7xxx host instance 0:
{1,1,1,1,1,1,8,1,1,1,1,1,1,1,1,1}
....
Disks are:
$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: DEC Model: RZ1BB-BS (C) DEC Rev: 0658
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: DEC Model: RZ2CC-KA (C) DEC Rev: 4110
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: QUANTUM Model: VIKING II 9.1WLS Rev: 4110
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: QUANTUM Model: VIKING II 9.1WLS Rev: 5520
Type: Direct-Access ANSI SCSI revision: 02
(back to brood, and read www.multicians.org ...)
> Later,
> David S. Miller
> davem@redhat.com
/Matti Aarnio
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/