Try the latest.
2.2.9.uniform-ide-6.19.kilo.patch.gz
> The mainboard is a Abit BX6-r2, the cdrom a no-name ATAPI 24x speed drive
>
> Uniform Multi-Platform E-IDE driver Revision: 6.19
> PIIX4: IDE controller on PCI bus 00 dev 39
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
> hda: Maxtor 90720D5, ATA DISK drive
> hdb: WDC AC310100B, ATA DISK drive
> hdc: WDC AC21200H, ATA DISK drive
> hdd: ATAPI CDROM, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: Maxtor 90720D5, 6869MB w/256kB Cache, CHS=875/255/63, (U)DMA
What in the world happen here to disable UDMA on a PIIX4?
> hdb: WDC AC310100B, 9671MB w/512kB Cache, CHS=1232/255/63, UDMA(33)
> hdc: WDC AC21200H, 1222MB w/128kB Cache, CHS=2484/16/63, DMA
> hdd: ATAPI 24X CD-ROM drive, 120kB Cache, DMA
> Uniform CDROM driver Revision: 2.55
> [..]
> Partition check:
> hda: hda1! hda2 hda3 hda4 < hda5 hda6 > < hda7 hda8 hda9
> hda10???????????? >
Double (two) extended tables?
> hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 >
> hdc: [PTBL] [621/64/63] hdc1 hdc2 < hdc5 >
> VFS: Mounted root (ext2 filesystem) readonly.
Andre Hedrick
The Linux IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/