My Linux box has just locked hard one hour ago. I cannot tell more
about this crash, as I was running X, so I have got no console
output. However, I got an oops on reboot, during the probe for SCSI
devices on my second card. I don't know if it is related. The output
from ksymoops is included below, with my dmesg and .config.
I am running 2.2.7-ac1 with Peter Horton's S3 Trio patch.
Here is a trace of the moment the oops occured:
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
scsi1 : interrupts not enabled. for better interactive performance,
scsi1 : please jumper the board for a free IRQ.
scsi1 : at port 0x240 interrupts disabled options CAN_QUEUE=16
CMD_PER_LUN=2 release=1 generic options AUTOPROBE_IRQ AUTOSENSE PSEUDO
DMA USLEEP, USLEEP_POLL=1 USLEEP_SLEEP=20 generic release=7
scsi1 : Generic NCR5380/53C400 Driver
scsi : 2 hosts.
Unable to handle kernel NULL pointer dereference at virtual address
00000000
current->tss.cr3 = 049d7000, %cr3 = 049d7000
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c018c3e0>]
EFLAGS: 00010246
eax: 00000000 ebx: c49d9f00 ecx: 00000046 edx: 00000000
esi: 00000001 edi: 00000000 ebp: c6a9b6e0 esp: c49d9dc4
ds: 0018 es: 0018 ss: 0018
Process insmod (pid: 735, process nr: 51, stackpage=c49d9000)
Stack: c37e5c00 c6a9b6e0 c032b7fc 00000024 ffffffff 00000000 00000000
00000000
000000fc 00000c80 c69c2000 c01a51ca c032b7fc c021ebc0 00000024
00000000
00000001 00000064 c032b7fc c021ebc0 00000024 0000001f 00000064
00000001
Call Trace: [<c6a9b6e0>] [<c69c2000>] [<c01a51ca>] [<c01ab9f0>]
[<c01a4628>] [<c01a346e>] [<c010f9dd>]
[<c0115f25>] [<c0108b3f>] [<c0107a28>] [<c01118e2>]
[<c6a9b6e0>] [<c018f413>] [<c6a9b6e0>] [<c6a97052>]
[<c6a97000>] [<c018faee>] [<c6a9b6e0>] [<c6a97000>]
[<c6a9a272>] [<c6a9b6e0>] [<c011386f>] [<c6a97000>]
[<c6a9baf4>] [<c6a95000>] [<c6a97048>] [<c010798c>]
[<c6a9b8a3>] [<c6a97000>]
Code: f3 ab 6a 08 6a 58 e8 25 20 00 00 89 c7 89 7c 24 3c 83 c4 08
sym53c875-0-<1,0>: M_IGN_RESIDUE received, but not yet implemented.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Here is the output from ksymoops:
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Options used: -V (default)
-o /lib/modules/2.2.7-ac1/ (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-m /usr/src/linux/System.map (default)
-c 1 (default)
-a - same as ksymoops (default)
You did not tell me where to find symbol information. I will assume
that the log matches the kernel and modules that are running right now
and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Warning in compare_ksyms_lsmod, module g_NCR5380 is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module ip_masq_autofw is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module ip_masq_cuseeme is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module ip_masq_ftp is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module ip_masq_irc is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module ip_masq_mfw is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module ip_masq_portfw is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module ip_masq_quake is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module ip_masq_raudio is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module ip_masq_user is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module ip_masq_vdolive is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module nfsd is in lsmod but not in ksyms, probably no symbols exported
Unable to handle kernel NULL pointer dereference at virtual address 00000000
current->tss.cr3 = 049d7000, %cr3 = 049d7000
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c018c3e0>]
EFLAGS: 00010246
eax: 00000000 ebx: c49d9f00 ecx: 00000046 edx: 00000000
esi: 00000001 edi: 00000000 ebp: c6a9b6e0 esp: c49d9dc4
ds: 0018 es: 0018 ss: 0018
Process insmod (pid: 735, process nr: 51, stackpage=c49d9000)
Stack: c37e5c00 c6a9b6e0 c032b7fc 00000024 ffffffff 00000000 00000000 00000000
000000fc 00000c80 c69c2000 c01a51ca c032b7fc c021ebc0 00000024 00000000
00000001 00000064 c032b7fc c021ebc0 00000024 0000001f 00000064 00000001
Call Trace: [<c6a9b6e0>] [<c69c2000>] [<c01a51ca>] [<c01ab9f0>] [<c01a4628>] [<c01a346e>] [<c010f9dd>]
[<c0115f25>] [<c0108b3f>] [<c0107a28>] [<c01118e2>] [<c6a9b6e0>] [<c018f413>] [<c6a9b6e0>] [<c6a97052>]
[<c6a97000>] [<c018faee>] [<c6a9b6e0>] [<c6a97000>] [<c6a9a272>] [<c6a9b6e0>] [<c011386f>] [<c6a97000>]
[<c6a9baf4>] [<c6a95000>] [<c6a97048>] [<c010798c>] [<c6a9b8a3>] [<c6a97000>]
Code: f3 ab 6a 08 6a 58 e8 25 20 00 00 89 c7 89 7c 24 3c 83 c4 08
Copying default arch from ksymoops, bfd_arch=8 bfd_mach=0
>>EIP; c018c3e0 <scan_scsis+54/4a4>
Trace; c6a9b6e0 <END_OF_CODE+1e590/????>
Trace; c69c2000 <_end+679f028/6806074>
Trace; c01a51ca <fbcon_scroll+582/a08>
Trace; c01ab9f0 <fbcon_cfb32_revc+0/98>
Trace; c01a4628 <fbcon_vbl_handler+74/8c>
Trace; c01a346e <cursor_timer_handler+36/3c>
Trace; c010f9dd <timer_bh+331/388>
Trace; c0115f25 <do_bottom_half+45/64>
Trace; c0108b3f <do_IRQ+3b/40>
Trace; c0107a28 <ret_from_intr+0/20>
Trace; c01118e2 <printk+166/174>
Trace; c6a9b6e0 <END_OF_CODE+1e590/????>
Trace; c018f413 <scsi_register_host+183/244>
Trace; c6a9b6e0 <END_OF_CODE+1e590/????>
Trace; c6a97052 <END_OF_CODE+19f02/????>
Trace; c6a97000 <END_OF_CODE+19eb0/????>
Trace; c018faee <scsi_register_module+2a/5c>
Trace; c6a9b6e0 <END_OF_CODE+1e590/????>
Trace; c6a97000 <END_OF_CODE+19eb0/????>
Trace; c6a9a272 <END_OF_CODE+1d122/????>
Trace; c6a9b6e0 <END_OF_CODE+1e590/????>
Trace; c011386f <sys_init_module+453/4bc>
Trace; c6a97000 <END_OF_CODE+19eb0/????>
Trace; c6a9baf4 <END_OF_CODE+1e9a4/????>
Trace; c6a95000 <END_OF_CODE+17eb0/????>
Trace; c6a97048 <END_OF_CODE+19ef8/????>
Trace; c010798c <system_call+34/38>
Trace; c6a9b8a3 <END_OF_CODE+1e753/????>
Trace; c6a97000 <END_OF_CODE+19eb0/????>
Code; c018c3e0 <scan_scsis+54/4a4> 00000000 <_EIP>:
Code; c018c3e0 <scan_scsis+54/4a4> 0: f3 ab repz stosl %eax,%es:(%edi)
Code; c018c3e2 <scan_scsis+56/4a4> 2: 6a 08 pushl $0x8
Code; c018c3e4 <scan_scsis+58/4a4> 4: 6a 58 pushl $0x58
Code; c018c3e6 <scan_scsis+5a/4a4> 6: e8 25 20 00 00 call 2030 <_EIP+0x2030> c018e410 <scsi_init_malloc+0/68>
Code; c018c3eb <scan_scsis+5f/4a4> b: 89 c7 movl %eax,%edi
Code; c018c3ed <scan_scsis+61/4a4> d: 89 7c 24 3c movl %edi,0x3c(%esp,1)
Code; c018c3f1 <scan_scsis+65/4a4> 11: 83 c4 08 addl $0x8,%esp
13 warnings issued. Results may not be reliable.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
My /var/log/dmesg:
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Linux version 2.2.7-ac1 (admin@carrosse.frmug.org) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #24 lun mai 3 11:56:21 CEST 1999
Console: colour dummy device 80x25
Calibrating delay loop... 133.53 BogoMIPS
Memory: 95684k/98304k available (832k kernel code, 408k reserved, 1292k data, 88k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Cyrix 6x86 2x Core/Bus Clock stepping 07
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb270
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Initializing RT netlink socket
Starting kswapd v 1.5
vesafb: enabling S3 linear frame buffer
vesafb: framebuffer at 0xe0000000, mapped to 0xc6800000, size 2048k
vesafb: mode is 800x600x32, linelength=3200, pages=0
vesafb: scrolling: redraw
vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: NEC Corporation DSE2550A, ATA DISK drive
hdd: HITACHI CDR-7730, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: NEC Corporation DSE2550A, 2441MB w/64kB Cache, CHS=620/128/63
sym53c8xx: at PCI bus 0, device 15, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875 detected with Tekram NVRAM
sym53c875-0: rev=0x03, base=0xe4000000, io_port=0x6000, irq=5
sym53c875-0: Tekram format NVRAM, ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0xe4001000
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
ncr53c8xx: at PCI bus 0, device 15, function 0
ncr53c8xx: IO region 0x6000 to 0x607f is in use
scsi0 : sym53c8xx - version 1.3c
scsi : 1 host.
Vendor: IBM Model: DDRS-34560D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
sym53c875-0-<1,0>: tagged command queue depth set to 8
scsi : detected 1 SCSI disk total.
sym53c875-0-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8925000 [4357 MB] [4.4 GB]
Partition check:
sda: sda1 sda2
hda: hda1 < hda5 hda6 hda7 > hda4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 88k freed
Adding Swap: 130748k swap-space (priority 1)
Adding Swap: 130748k swap-space (priority 1)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
My .config:
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M686 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_SMP is not set
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_OPTIMIZE is not set
CONFIG_PCI_OLD_PROC=y
# CONFIG_MCA is not set
# CONFIG_VISWS is not set
# CONFIG_I2O is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# CONFIG_BINFMT_JAVA is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_OTHER is not set
# CONFIG_APM is not set
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_PARPORT=m
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_VIA82C586 is not set
# CONFIG_BLK_DEV_CMD646 is not set
# CONFIG_IDE_CHIPSETS is not set
#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_RAM=m
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE_PARPORT=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK_DEV=y
CONFIG_FIREWALL=y
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_IP_FIREWALL=y
CONFIG_IP_FIREWALL_NETLINK=y
CONFIG_NETLINK_DEV=y
CONFIG_IP_ALWAYS_DEFRAG=y
# CONFIG_IP_TRANSPARENT_PROXY is not set
CONFIG_IP_MASQUERADE=y
#
# Protocol-specific masquerading support will be built as modules.
#
CONFIG_IP_MASQUERADE_ICMP=y
#
# Protocol-specific masquerading support will be built as modules.
#
CONFIG_IP_MASQUERADE_MOD=y
CONFIG_IP_MASQUERADE_IPAUTOFW=m
CONFIG_IP_MASQUERADE_IPPORTFW=m
CONFIG_IP_MASQUERADE_MFW=m
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_ALIAS=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
#
# (it is safe to leave these untouched)
#
CONFIG_INET_RARP=m
CONFIG_SKB_LARGE=y
# CONFIG_IPV6 is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_CPU_IS_SLOW is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_G_NCR5380_PORT=y
# CONFIG_SCSI_G_NCR5380_MEM is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_NCR53C8XX=y
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=40
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_RTL8139 is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_ISA=y
# CONFIG_AT1700 is not set
# CONFIG_E2100 is not set
# CONFIG_DEPCA is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_FMV18X is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_HP100 is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=m
# CONFIG_SEEQ8005 is not set
# CONFIG_SK_G16 is not set
CONFIG_NET_EISA=y
# CONFIG_PCNET32 is not set
# CONFIG_ACENIC is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DE4X5 is not set
# CONFIG_DEC_ELCP is not set
# CONFIG_DGRS is not set
# CONFIG_EEXPRESS_PRO100 is not set
# CONFIG_LNE390 is not set
# CONFIG_NE3210 is not set
CONFIG_NE2K_PCI=m
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_ES3210 is not set
# CONFIG_EPIC100 is not set
# CONFIG_ZNET is not set
# CONFIG_NET_POCKET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
#
# CCP compressors for PPP are only built as modules.
#
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_RADIO is not set
#
# Token ring devices
#
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_HOSTESS_SV11 is not set
# CONFIG_COSA is not set
# CONFIG_SEALEVEL_4021 is not set
# CONFIG_DLCI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA subsystem support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_PRINTER_READBACK=y
# CONFIG_MOUSE is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_WATCHDOG is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
#
# Video For Linux
#
# CONFIG_VIDEO_DEV is not set
#
# Joystick support
#
CONFIG_JOYSTICK=m
CONFIG_JOY_ANALOG=m
# CONFIG_JOY_ASSASIN is not set
# CONFIG_JOY_GRAVIS is not set
# CONFIG_JOY_LOGITECH is not set
# CONFIG_JOY_SIDEWINDER is not set
# CONFIG_JOY_THRUSTMASTER is not set
# CONFIG_JOY_LIGHTNING is not set
# CONFIG_JOY_CONSOLE is not set
# CONFIG_JOY_DB9 is not set
# CONFIG_JOY_TURBOGRAFX is not set
# CONFIG_DTLK is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_FT_NORMAL_DEBUG is not set
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
# CONFIG_FT_STD_FDC is not set
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
#
# USB drivers - not for the faint of heart
#
# CONFIG_USB is not set
#
# Filesystems
#
CONFIG_QUOTA=y
CONFIG_AUTOFS_FS=m
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_MINIX_FS=m
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=m
CONFIG_NFSD=m
# CONFIG_NFSD_SUN is not set
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
#
# Partition Types
#
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_SMD_DISKLABEL is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_PM2 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_VGA16 is not set
CONFIG_VIDEO_SELECT=y
CONFIG_FB_MAN_LFB=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_MFB=y
CONFIG_FBCON_CFB2=y
CONFIG_FBCON_CFB4=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
# CONFIG_FBCON_VGA_PLANES is not set
# CONFIG_FBCON_VGA is not set
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_PAS is not set
CONFIG_SOUND_SB=m
# CONFIG_SOUND_PCISB is not set
# CONFIG_SOUND_ESSMAESTRO is not set
CONFIG_SOUND_ADLIB=m
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_TRIX is not set
CONFIG_SOUND_MAD16=m
CONFIG_MAD16_OLDCARD=y
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_OPL3SA1 is not set
CONFIG_SOUND_SOFTOSS=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_VMIDI=m
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_USBAUDIO is not set
# CONFIG_SOUND_WAVEARTIST is not set
#
# Additional low level sound drivers
#
# CONFIG_LOWLEVEL_SOUND is not set
#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/