------=_NextPart_000_06B8_01BE81FE.14776D80
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
A brief Introduction
I am a Windoze user, programmer, system administrator. compitent in =
C/C++,
Delphi, Visual Basic and more. I also am a little more than a newbe to =
linux
with several computers running Windows version x and Linux mostlly using
Lucent Viking modems.
I have been trying to make these work in linux and have been reading all =
of
the topics from several mailing lists with very little help until I =
found
someone saying that this modem was all software driven (duh I knew that) =
and
that the drivers were somekind of seceret (did not know that can't even =
see
how, sence i found them?) and that they were not available. Well as of =
now i
have the technology (drivers source code) to make the drivers required =
to
run my modem. I can recreate the drivers for windozs make new ones for =
DOS
(also not "supported" by the vendor) but i have no ability to program in
Linux and don't even know where to start. The drivers would need to do 3
major things
1. initialize the device maybee at a very early stage the ports are =
turned
off until initialize is complete and successful.
2. process every 32bit word before being sent to the modem.
3. process every 32bit word after being recieved by the modem.
I think this might be slightly off topic but am not sure I know that i =
have
seen this and simalar topics on this and a few other mailing lists. =
sorry
for any inconvience.please feel free to respond even if you don't know =
how
to do this as I learn from every comment
Thank you
Richard.Reynolds@usa.net
=20
------=_NextPart_000_06B8_01BE81FE.14776D80
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">