American Mega-gotchas Incorporated?

Harvey Fishman (fishman@panix.com)
Fri, 5 Mar 1999 18:17:32 -0500 (EST)


Can anyone give me some hints on setting up an AMI P-II planar BIOS so that
video times out and blanks but can recover under Linux? The system board
is a SuperMicro P6SBS (first version) with a 400 MHz. P-II. The board dual
boots between Linux and NTW4 (SP4). Works fine under NT, but if I set it
so that it times out for inactivity it is out permanently under Linux. Only
way that I have found to recover is B-R-S and let the boot check the disk
since it did not shut down cleanly. Having the video time out is an absolute
necessity for me. I currently have version 1.5b of the BIOS, but the problem
has occurred in all versions starting at 1.0. Thanks for any pointers...

Harvey

----------------------------------------------------------------------------
Harvey Fishman |
fishman@panix.com | A little heresy is good for the soul.
718-258-7276 |

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/