> The machine works quite happily when disks are mounted from the first
> controller, but as soon as I attempt to mount a disk on the second
> controller I get these errors :
>
> kernel: scsi : aborting command due to timeout : pid 55961, scsi1, channel 0, id 4, lun 0 Write (6) 00 00 41 02 00
> kernel: scsi : aborting command due to timeout : pid 55962, scsi1, channel 0, id 4, lun 0 Read (6) 1c 40 87 02 00
> kernel: SCSI host 1 abort (pid 55962) timed out - resetting
> kernel: SCSI bus is being reset for host 1 channel 0.
> kernel: (scsi1:-1:-1:-1) Referenced SCB 0 not valid during SELTO.
> kernel: SCSISEQ = 0x5a SEQADDR = 0x8 SSTAT0 = 0x10 SSTAT1 = 0x88
>
> The last two lines repeat many times until the machine panics.
Looks like this works fine again in ac7, so I'll stop looking for the
problem now.
James.
--
"Yield to temptation -- | Consultancy: james@cloud9.co.uk
it may not pass your way again" | http://www.cloud9.co.uk/james
|
- Lazarus Long | James Fidell
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/