Re: Alpha & NE2000

Vladimir Dergachev (vdergach@sas.upenn.edu)
Mon, 22 Feb 1999 19:29:06 -0500 (EST)


I have a similar problem too. In my system I have both ATI All-in-Wonder
card and NCR scsi adapter. Both are pci. Both are assigned irq 10.

I did not have any problems because I did not use NCR adapter (no scsi
devices yet) and video adapter is not using it's irq either. Perhaps
something is wrong in NCR adapter code.

Vladimir Dergachev

On Mon, 22 Feb 1999, Matthias Schniedermeyer wrote:

> #Include <hallo.h>
>
>
>
> I have a STRANGE problem with my Alpha (Axppci 33, 166Mhz (alias noname))
> To connect the Alpha to the network i have a NoName NE2000 with Winbond
> Chipset.
>
> When i boot Kernel 2.0.35 the Card is detected at "IO 0x8000, IRQ 9" and
> i can use it.
> When i boot Kernel 2.2.1 the Card is detected at "IO 0x8800, IRQ 13" and
> NOTHING works.
>
> As you can see below it seems like the kernel mixes the NIC with the
> Onboard NCR 810. (The NCR 810 works, the system is boots from it.)
>
> cat /proc/pci unter 2.0.35 says
>
> - schnipp -
> PCI devices found:
> Bus 0, device 12, function 0:
> VGA compatible device: S3 Inc. Vision 864-P (rev 0).
> Medium devsel. IRQ 15.
> Non-prefetchable 32 bit memory at 0x4800000.
> Bus 0, device 11, function 0:
> Ethernet controller: Winbond NE2000-PCI (rev 11).
> Medium devsel. Fast back-to-back capable. IRQ 9.
> I/O at 0x8000.
> Bus 0, device 7, function 0:
> Non-VGA device: Intel 82378IB (rev 3).
> Medium devsel. Master Capable. No bursts.
> Bus 0, device 6, function 0:
> Non-VGA device: NCR 53c810 (rev 1).
> Medium devsel. IRQ 11. Master Capable. Latency=32.
> I/O at 0x8800.
> Non-prefetchable 32 bit memory at 0x5000000.
> - schnapp -
>
> cat /proc/pci under 2.2.1 says
>
> - schnipp -
> PCI devices found:
> Bus 0, device 6, function 0:
> Non-VGA device: NCR 53c810 (rev 1).
> Medium devsel. IRQ 11. Master Capable. Latency=32.
> I/O at 0x8000 [0x8001].
> Non-prefetchable 32 bit memory at 0x4200000 [0x4200000].
> Bus 0, device 7, function 0:
> Non-VGA device: Intel 82378IB (rev 3).
> Medium devsel. Master Capable. No bursts.
> Bus 0, device 11, function 0:
> Ethernet controller: Winbond NE2000-PCI (rev 11).
> Medium devsel. Fast back-to-back capable. IRQ 13.
> I/O at 0x8800 [0x8801].
> Bus 0, device 12, function 0:
> VGA compatible device: S3 Inc. Vision 864-P (rev 0).
> Medium devsel. IRQ 15.
> Non-prefetchable 32 bit memory at 0x4800000 [0x4800000].
> - schnapp -
>
> lspci -vvvvv says
>
> -schnipp -
> 00:06.0 Non-VGA unclassified device: Symbios Logic Inc. (formerly NCR)
> 53c810 (rev 01)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 set
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at 8000
> Region 1: Memory at 0000000004200000 (32-bit, non-prefetchable)
>
> 00:07.0 Non-VGA unclassified device: Intel Corporation 82378IB [SIO ISA
> Bridge]
> (rev 03)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 set
>
> 00:0b.0 Ethernet controller: Winbond Electronics Corp 89C940 (rev 0b)
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 13
> Region 0: I/O ports at 8800
>
> 00:0c.0 VGA compatible unclassified device: S3 Inc. Vision 864 vers 1
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin ? routed to IRQ 15
> Region 0: Memory at 0000000004800000 (32-bit, non-prefetchable)
> Expansion ROM at 000c0000
> - schnapp -
>
>
>
>
>
>
> Bis denn
>
> --
> Mein persoenliches (deutsches) Linux Lied: "Abenteuerland" von PUR
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/