The card is correctly detected (just like with 2.0.37, where it was
working perfectly), but the boot process (or module insertion, with
modularized SCSI support) gets stuck with the following messages in
/var/log/messages.
My config is Asus P2B, PII400, 128Mb/10Gb IDE, RedHat 5.2 upgraded to
kernel 2.2.1-ac6 (I made the necessary upgrades before going to
2.2.1).
The problem arises with SCSI compiled into the kernel as well as with
modularized SCSI support.
Any hint?
If someone provides a patch, I'm ready to test it and to report the
results.
Thanks in advance.
The messages are:
aec671x_detect:
ACARD AEC-671X PCI Ultra/W SCSI-3 Host Adapter: 0 IO:d000, IRQ:9.
ID: 1 MATSHITACD-R CW-7502 4.10
ID: 7 Host Adapter
scsi0 : ACARD AEC-6710/6712 PCI Ultra/W SCSI-3 Adapter Driver V1.0
scsi : 1 host.
scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 10 00
workingu=1 last_cmd=1 quhdu=2 quendu=2 r 0= 6 r 1=2c r 2=cf r 3= 3 r 4= 0 r 5= 0 r 6= 0 r 7=10 r 8= 0 r 9= 0 r a= 0 r b= 0 r c= 0 r d= 0 r e= 0 r f= 0 r10=36 r11=20 r12= 0 r13= 0 r14= 4 r15= 1 r16=80 r1c=a1 r1f=37 in_snd= 0 r20= 9 r22= 1
scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 10 00
workingu=1 last_cmd=1 quhdu=2 quendu=2 r 0= 6 r 1=2c r 2=cf r 3= 3 r 4= 0 r 5= 0 r 6= 0 r 7=10 r 8= 0 r 9= 0 r a= 0 r b= 0 r c= 0 r d= 0 r e= 0 r f= 0 r10=36 r11=20 r12= 0 r13= 0 r14= 4 r15= 1 r16=80 r1c= 0 r1f=35 in_snd= 0 r20= 9 r22= 1
SCSI host 0 abort (pid 1) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 1) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
-- Michel Mauny ---------------------------------------------- INRIA -- BP 105 -- F-78153 Le Chesnay Cedex Tel.: +33 1 39 63 57 96 Fax: +33 1 39 63 56 84 Email: Michel.Mauny@inria.fr WWW: http://www.inria.fr/Michel.Mauny ----------------------------------------------- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/