Re: 10.2 Gig HDD

Anthony Barbachan (barbacha@Hinako.AMBusiness.com)
Fri, 22 Jan 1999 00:05:01 -0500


>I tried linux hda=1247,255,63
>I have kernel 2.0.36 (Redhat 5.2 base system)
>Booting off a boot floppy .... Loads up
>and hda: QUANTUM FIREBALL EX10.2A 9789MB w/418kB Cache, CHS=1247/255/63,
>UDMA
>
>To my Knowledge 9789MB Not Equal 10.2Gig

Drive makers fudge the numbers and call 1,000,000,000 a Gig instead of 2 to
the 30th power. So actually 9789MB sounds right for your hard drive.

>If I boot up in Windows with this drive it says it should be 10263MB
>Total,Total LBA Sectors 20033055
>Windows Finds it great (there is a 8.4? Gig limit on win95?) whcih the disk
>manager fixes?
>

The disk manager only fixes the booting problem on machines who's BIOS
doesn't natively support drive a particular drive because its capacity is to
large. (I misread your question before) If your BIOS is recognizing all
the space on your hard drive and you can boot off of it from a 10GB
partition then disk manager will not give you anything. As far as win95
goes there is a 8GB limit if you use the FAT filesystem instead of FAT32.

>What is the problem? Me? Linux? The Bios? The Machine? Or can't I add up

>right?
>

If you can boot Linux on your hard drive then nothing is wrong, the above
makes it sound as if you have confused the numbers. If you can't get Linux
to boot then first of all get the lastest stable kernel 2.0.36 or 2.2.0 (if
its out by then), compile it for your system and see if that fixes your
problem. Check out the HOWTO's as well for other possibilities.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/