Hi,
Is anyone other than me having problems with the vortex driver? I can
get all the recent kernels to hang networking almost instantly if I get ftp to
another computer and attempt to download a large number of large files.
Sometimes it hangs 10 MB into the transfer, sometimes 1 MB but the only fix is
to reboot the machine if I want to get networking back. I've attached the
dmesg log below - the relevent 3c59x stuff is at the end of it.
-- Matthew Harrell Beauty is in the eye of the beer Simulation Technology Division, SAIC holder. mharrell@std.saic.com--M9NhX3UHpAaciwkO Content-Type: text/plain Content-Disposition: attachment; filename="dmesg.txt"
Linux version 2.2.0-pre7-ac7-SMP (root@tbilisi) (gcc version egcs-2.91.60 19981201 (egcs-1.1.1 release)) #1 SMP Mon Jan 18 08:06:43 EST 1999 Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: 440FX APIC at: 0xFEE00000 Processor #1 Pentium(tm) Pro APIC version 17 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Detected 199311777 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 198.66 BogoMIPS Memory: 257284k/262144k available (976k kernel code, 420k reserved, 3420k data, 44k init) Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.26 (19981001) Richard Gooch (rgooch@atnf.csiro.au) per-CPU timeslice cutoff: 50.07 usecs. CPU1: Intel Pentium Pro stepping 07 calibrating APIC timer ... ..... CPU clock speed is 199.3162 MHz. ..... APIC bus clock speed is 66.4385 MHz. Booting processor 0 eip 2000 Calibrating delay loop... 199.07 BogoMIPS OK. CPU0: Intel Pentium Pro stepping 07 Total of 2 processors activated (397.72 BogoMIPS). enabling symmetric IO mode... ...done. ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC pin 0, 16, 20, 21, 22, 23 not connected. number of MP IRQ sources: 19. number of IO-APIC registers: 24. testing the IO APIC....................... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 0 0 0 0 0 1 1 59 02 0FF 0F 0 0 0 0 0 1 1 51 03 000 00 0 0 0 0 0 1 1 61 04 000 00 0 0 0 0 0 1 1 69 05 000 00 0 0 0 0 0 1 1 71 06 000 00 0 0 0 0 0 1 1 79 07 000 00 0 0 0 0 0 1 1 81 08 000 00 0 0 0 0 0 1 1 89 09 000 00 0 0 0 0 0 1 1 91 0a 000 00 0 0 0 0 0 1 1 99 0b 000 00 0 0 0 0 0 1 1 A1 0c 000 00 0 0 0 0 0 1 1 A9 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 0 0 0 0 0 1 1 B1 0f 000 00 0 0 0 0 0 1 1 B9 10 000 00 1 0 0 0 0 0 0 00 11 0FF 0F 1 1 0 1 0 1 1 C1 12 0FF 0F 1 1 0 1 0 1 1 C9 13 0FF 0F 1 1 0 1 0 1 1 D1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ9 -> 9 IRQ10 -> 10 IRQ11 -> 11 IRQ12 -> 12 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ17 -> 17 IRQ18 -> 18 IRQ19 -> 19 .................................... done. PCI: PCI BIOS revision 2.10 entry at 0xfd9de PCI: Using configuration type 1 PCI: Probing PCI hardware PCI->APIC IRQ transform: (B0,I15,P0) -> 19 PCI->APIC IRQ transform: (B0,I16,P0) -> 18 PCI->APIC IRQ transform: (B0,I17,P0) -> 17 PCI: 00:00 [8086/1237]: Passive release enable (00) Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP Linux IP multicast router 0.06 plus PIM-SM Initializing RT netlink socket Starting kswapd v 1.5 pty: 256 Unix98 ptys configured apm: BIOS not found. Real Time Clock Driver v1.09 PIIX3: IDE controller on PCI bus 00 dev 39 PIIX3: device not capable of full native PCI mode PIIX3: device disabled (BIOS) md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 (scsi0) <Adaptec AHA-294X Ultra2 SCSI host adapter> found at PCI 17/0 (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs (scsi0) Downloading sequencer code... 407 instructions downloaded scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.10/3.2.4 <Adaptec AHA-294X Ultra2 SCSI host adapter> scsi : 1 host. Vendor: SEAGATE Model: ST32171N Rev: 0280 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: SEAGATE Model: ST19101W Rev: 0014 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 Vendor: SEAGATE Model: ST34371N Rev: 0338 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0 Vendor: SEAGATE Model: ST34371N Rev: 0280 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdd at scsi0, channel 0, id 3, lun 0 Vendor: iomega Model: jaz 1GB Rev: H.72 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi removable disk sde at scsi0, channel 0, id 4, lun 0 Vendor: PLEXTOR Model: CD-ROM PX-12CS Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 scsi : detected 5 SCSI disks total. (scsi0:0:0:0) Synchronous at 20.0 Mbyte/sec, offset 15. SCSI device sda: hdwr sector= 512 bytes. Sectors= 4222640 [2061 MB] [2.1 GB] (scsi0:0:1:0) Synchronous at 40.0 Mbyte/sec, offset 15. SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] (scsi0:0:2:0) Synchronous at 20.0 Mbyte/sec, offset 15. SCSI device sdc: hdwr sector= 512 bytes. Sectors= 8496960 [4148 MB] [4.1 GB] (scsi0:0:3:0) Synchronous at 20.0 Mbyte/sec, offset 15. SCSI device sdd: hdwr sector= 512 bytes. Sectors= 8496960 [4148 MB] [4.1 GB] (scsi0:0:4:0) Synchronous at 10.0 Mbyte/sec, offset 15. SCSI device sde: hdwr sector= 512 bytes. Sectors= 2091050 [1021 MB] [1.0 GB] sde: Write Protect is off Partition check: sda: sda1 sdb: sdb1 sdb2 sdb3 sdc: sdc1 sdc4 sdd: sde: sde4 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 44k freed Adding Swap: 130748k swap-space (priority 1) Adding Swap: 128516k swap-space (priority 2) Serial driver version 4.27 with SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html eth0: 3Com 3c595 Vortex 100baseTx at 0xece0, 00:60:97:53:e7:1f, IRQ 18 Internal config register is 141001b, transceivers 0xe10a. 64K word-wide RAM 3:1 Rx:Tx split, autoselect/100baseTX interface. eth0: Overriding PCI latency timer (CFLT) setting of 64, new value is 248. eth0: Initial media type 100baseTX. eth0: vortex_open() InternalConfig 0141001b. eth0: vortex_open() irq 18 media status 8802. eth0: Media selection timer tick happened, 100baseTX. eth0: Media 100baseTX has link beat, 8882. eth0: Media selection timer finished, 100baseTX. nfsd_init: initialized fhcache, entries=256 nfsd_init: initialized fhcache, entries=256 eth0: Transmit error, Tx status register 90. eth0: Transmit error, Tx status register 90. eth0: Transmit error, Tx status register 90. eth0: Transmit error, Tx status register c0. eth0: Transmit error, Tx status register c0. eth0: Transmit error, Tx status register c0. Socket destroy delayed (r=0 w=384)
--M9NhX3UHpAaciwkO--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/