> In <Pine.OSF.4.05.9901061346270.8910-100000@saul6.u.washington.edu> Allen Goldstein (gold@u.washington.edu) wrote:
>
Victor
I couldn't get dhcpcd-1.3.16 to work on 2.2-pre4, although it worked on
2.0.36. Of course that does not mean it won't work, just that I don't have
a clue how to make it go. The dhclient appears to be OK on 2.2
>
> > On Wed, 6 Jan 1999, Graham TerMarsch wrote:
>
> >> Al Goldstein n wrote:
> >> > My brief experience with this kernel was similar to that of 2.131.
> >> > Dhcp doesn't work. I have two ether interfaces using 3com 509
> >> > and 3com vortex. The 509 interface did not come up. The dhcp is
> >> > on the vortex and it wouldn't connect. The box has SMP. Not much info
> >> > in Messages. But it might be that the interupt assignment is screwed up.
> >> > The sequential io was much faster than 2.0.36 both on scsi and ide
> > Graham
>
> > I'm using dhcpcd-1.3.16. Which one have you got and where can they now be
> > got. The site I used was shutting down.
>
> It's still on ftp://ftp.kddlabs.co.jp/.2/inet/dhcp/dhcpcd/dhcpcd-1.3.16.tar.gz
>
> >> Which DHCP client are you using? Asking as I know that there was a
> >> pre-release version of the ISC DHCP software out recently that worked better
> >> with 2.1 kernels. Not perfect yet as they were looking for people to send
> >> back success/failure reports before wanting to do a final release, but it did
> >> at least get my network devices configured right. Only catch I saw was a ton
> >> of debugging output which I'm expecting to see removed prior to the final
> >> release.
> >>
>
>
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/