IDE-Driver UPDATES towards ATA4 (2.0.36)(2.1.131)

Andre M. Hedrick (hedrick@astro.dyer.vanderbilt.edu)
Fri, 11 Dec 1998 10:19:21 -0600 (CST)


"hdparm-3.5b.patch.gz" patch against "hdparm-3.5"

"2.0.36.patch.udma7.gz" and report "syslog.36"

Above patch has only chipset support equal to previous.
Aladdin is not supported, until some back codes the work
from 2.1.131.ide.update.26.

"2.1.131.ide.update.26.gz"
"2.1.131.ide.update.26-ac6.gz"
"2.1.131.ide.update.26-ac7.gz" and report "syslog.131"

These patches are stress tested to a half-step of over-clocking.
Dual PPro 200MHz 512k pushed to 233MHz on a 66MHz apic bus clock and
a 33MHz PCI bus clock.

There are correct drive sizings up to 8Gig tested.
I should be getting a new 12Gig in the mail for final blanket tests.

hdparm -i /dev/hda

/dev/hda:
Model=QUANTUM FIREBALL SE8.4A, FwRev=APC.0B00, SerialNo=338713591007
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=512, ECCbytes=4
BuffType=3(DualPortCache), BuffSize=80kB, MaxMultSect=16, MultSect=16
DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=2(fast)
--------- TEST -------------
CurCHS=1027/255/63, CurSects=16514064, LBAsects=16514064
--------- TEST -------------
LBA CHS=1027/255/63 Native, LBAsects=16514064
tDMA={min:120,rec:120}, DMA modes: sword0 sword1 sword2 mword0 mword1 mword2
IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 *mode2

hdparm -i /dev/hdc

/dev/hdc:
Model=Maxtor 72004 AP, FwRev=2A3C1845, SerialNo=U905GS4S
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>5Mbs FmtGapReq }
RawCHS=3893/16/63, TrkSize=0, SectSize=0, ECCbytes=34
BuffType=3(DualPortCache), BuffSize=128kB, MaxMultSect=32, MultSect=32
DblWordIO=yes, maxPIO=2(fast), DMA=yes, maxDMA=1(medium)
CurCHS=3893/16/63, CurSects=3924144, LBA=yes, LBAsects=3924360
WARNING 216 ORPHANED SECTORS :: USE LBA TRANSLATIONS
--------- TEST -------------
CurCHS=3893/16/63, CurSects=3924144, LBAsects=3924360
--------- TEST -------------
tDMA={min:120,rec:120}, DMA modes: sword0 sword1 *sword2 mword0 mword1 *mword2
IORDY=on/off, tPIO={min:180,w/IORDY:120}, PIO modes: mode3 mode4

Cheers,
Andre Hedrick
The IDE-FNG for Linux
The APC UPS Specialist for Linux

http://www.dyer.vanderbilt.edu/server/udma/
http://www.dyer.vanderbilt.edu/server/apcupsd/apcupsd-3.5.0.bin.tar.gz

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/