>
> SCSI bus is being reset for host 0 channel 0.
> scsi : aborting command due to timeout : pid 16, scsi0, channel0, id 6,
> lun 1 Test Unit Ready 20 00 00 00 00
>
> I have two devices, a JVC CD-R and a Conner hard drive attached to my SCSI
> card.
>
I presume the SCSI bus is properly terminated in BOTH ends, but not
in the middle.....
It looks like the Conner 'told' the Adaptec that it could run
Sync/Disconnect and it can't. This is a common problem with Conners.
In the Adptec BIOS menu, turn OFF disconnect for this drive and
see if it fixes it. If not, turn OFF synchronous negotiation.
Cheers,
Dick Johnson
***** FILE SYSTEM WAS MODIFIED *****
Penguin : Linux version 2.1.128 on an i686 machine (400.59 BogoMips).
Warning : It's hard to remain at the trailing edge of technology.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/