sound with 2.1.128?

Felix von Leitner (leitner@math.fu-berlin.de)
Sat, 14 Nov 1998 22:33:01 +0100

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: George Bonser: ".127/.128 weirdness"
Previous message: Benjamin Redelings I: "Re: elevator algorithm bug in ll_rw_blk.c"

I am using 2.1.128ac2 on Intel SMP, and I don't get any sound.
I am using the same ALSA driver that worked for 2.1.127, it still
compiles and installs fine but there is no sound output. Programs can
open /dev/dsp, I can set the mixer, yet there is no sound.

So I tried OSS (btw: using SB16 driver on my SB64), I can load the
driver but always get

Sound: DMA (output) timed out - IRQ/DRQ config error?

in my syslog, although I use isapnp to set the correct values. So I
suspect this to be a different issue than an ALSA issue.

What should I do now?

Felix

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

Next message: George Bonser: ".127/.128 weirdness"
Previous message: Benjamin Redelings I: "Re: elevator algorithm bug in ll_rw_blk.c"