2.1.122, 123 (and probably 124) work OK when built SMP.
Again, this is on a K6/300 430TX UDMA IDE laptop.
PIIX4: IDE controller on PCI bus 00 dev 09
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA MK4309MAT, ATA DISK drive
hdc: UJDA150, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: TOSHIBA MK4309MAT, 4126MB w/0kB Cache, CHS=559/240/63, UDMA
<<<< hangs here.
hdc: ATAPI 24X CDROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.14
Ctrl/alt/ sequences are ignored after the hang.
What kind of debug info is needed to help diagnose this?
Should I try commenting out something in drivers/block/ide.c?
Nathan Myers
ncm@cantrip.org
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/