Re: amdk6-2, MVP3 and linux
Justin A. Kolodziej (4wg7kolodzie@vmsb.csd.mu.edu)
Tue, 29 Sep 1998 08:14:54 -0500
sfrost@ns.snowman.net wrote:
>
> On Mon, 28 Sep 1998, Koos Vriezen wrote:
>
> > Hi,
> >
> > First I installed Red Hat 5.1 (kernel 2.0.35). Next I compiled the new
> > egcs 1.1b compiler optimized for a pentium (pgcc). I got a signal 11
> > in this attempt. Only after reducing my motherboard bus speed from 100 to
> > 66 MHz, and CPU speed from 300 MHz to 266 MHz the compiler compiled.
> > I even tried anothor 100 MHz DIMM module, without success.
> > I'm using 2.1.123 kernel now, enabled the new VIA driver without success.
>
> I expect it probably is a memory problem, sig11's are almost always
> memory problems....
>
> > Where can I get those memory test utilities?
>
> http://www.ultra-x.com/rst.html I believe is the one that I was
> thinking of, unfortunately it's $69 or so...
You want memtest, I would think. Get it at
<http://sunsite.unc.edu/pub/Linux/system/hardware>.
--
Easiest Color To Solve On A Rubik's Cube:
Black. Simply remove all the little colored stickers on the
cube, and each of side of the cube will now be the original color of
the plastic underneath -- black. According to the instructions, this
means the puzzle is solved.
-- Steve Rubenstein
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/