[2.1.123-pre3] Works fine, but MESSAGE: "Unhandled irq 14 (13)"

Benjamin Redelings I (bredelin@ucsd.edu)
Sun, 27 Sep 1998 12:48:41 -0700

This is a UP PPro 165, here is /proc/interrupts:
telomere:~> cat /proc/interrupts
CPU0
0: 1549993 XT-PIC timer
1: 1613 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 2399 XT-PIC eth0
4: 44960 XT-PIC serial
5: 1 XT-PIC soundblaster
13: 1 XT-PIC fpu
14: 8677 XT-PIC ide0
NMI: 0

I got the message only twice only, and before the disk was
initialized. Here is the relevant stuff from 'dmesg':
...
pty: 256 Unix98 ptys configured
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Unhandled irq 14 (13)
hda: Conner Peripherals 1620MB - CFS1621A, ATA DISK drive
Unhandled irq 14 (13)
hdb: TOSHIBA CD-ROM XM-5702B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: Conner Peripherals 1620MB - CFS1621A, 1548MB w/0kB Cache,
CHS=786/64/63, DMA
Floppy drive(s): fd0 is 1.44M
...

-BenRI

-- 
http://sdcc13.ucsd.edu/~bredelin


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/