since there exists some documentation about how to get an ESS1868
soundcard to life I thought I could do another try to run my
Guillemot Maxi Sound64 Dynamic 3D with ESS1868 chipset under linux.
But I have had no luck so far and I hope that somebody in this
mailinglist can help me. Here come some informations about my
setup:
cat /proc/sound :
OSS/Free:3.8s2++-971130
Load type: Driver loaded as a module
Kernel: Linux spiff.spacenet 2.1.117 #1 Mon Aug 24 09:35:08 CEST 1998 i586
Config options: 0
Installed drivers:
Card config:
Audio devices:
0: ESS ES1688 AudioDrive (rev 11) (3.1)
Synth devices:
0: Yamaha OPL3
Midi devices:
0: MPU-401 0.0 Midi interface #1
Timers:
0: System clock
Mixers:
0: Sound Blaster
cat /proc/interrupts :
CPU0
0: 3303183 XT-PIC timer
1: 25937 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 102605 XT-PIC serial
5: 316 XT-PIC soundblaster
8: 1 XT-PIC rtc
9: 1 XT-PIC mpu401
11: 14 XT-PIC BusLogic BT-930
13: 1 XT-PIC fpu
14: 24344 XT-PIC ide0
15: 1394731 XT-PIC NE2000
NMI: 0
cat /proc/ioports :
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0220-022f : soundblaster
0280-029f : NE2000
02f8-02ff : serial(auto)
0330-0331 : mpu401
0388-038b : Yamaha OPL3
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
6100-61ff : BusLogic BT-930
f000-f007 : ide0
cat /proc/dma :
1: SoundBlaster8
4: cascade
grep -v "^#" /etc/isapnp.conf | grep -v "^$" :
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)
(CONFIGURE ESS1868/-1 (LD 0
(IO 0 (BASE 0x0800))
(ACT Y)
))
(CONFIGURE ESS1868/-1 (LD 1
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 0))
(INT 0 (IRQ 5 (MODE +E)))
(IO 0 (BASE 0x0220))
(IO 1 (BASE 0x0388))
(IO 2 (BASE 0x0300))
(ACT Y)
))
(CONFIGURE ESS1868/-1 (LD 2
(IO 0 (BASE 0x0201))
(ACT Y)
))
(CONFIGURE ESS1868/-1 (LD 3
(INT 0 (IRQ 9 (MODE +E)))
(IO 0 (BASE 0x0330))
(ACT Y)
))
(WAITFORKEY)
The card is initalized using isapnptools-1.15, the card seems to
get it's interrupt and the mixer settings are all at least 50% (using
aumix). I tried alsa also but had no luck with it either :(
I've read something about mixer routing or something like this
a long time ago in this mailinglist but I can't find this posting
any more. Maybe it's just a problem of not unmuting the sound card.
I don't know.
Tips are really welcome.
Regards,
Jogi
--Well, yeah ... I suppose there's no point in getting greedy, is there?
<< Calvin & Hobbes >>
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html