---------- Forwarded message ----------
Date: Fri, 29 May 1998 12:17:54 -0500
From: Andre Hedrick <hedrick@astro.dyer.vanderbilt.edu>
To: support@promise.com
Subject: Ultra33 as RAID??
Here is the PCI 256b config space.
Why does this report as a RAID card and not IDE, this is fine with me
since it used only one interrupt and shifts nicely under SMP
for linux with with an interrupt ranging between 16->20 or 0x10->0x14.
In this mode, does it support MODE 0,1,5.........?
00:0e.0 RAID bus controller: Promise Technology, Inc. 20246 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at fff0
Region 1: I/O ports at ffe4
Region 2: I/O ports at ffa8
Region 3: I/O ports at fbe4
Region 4: I/O ports at ff80
Expansion ROM at ffbe0000
00: 5a 10 33 4d 07 00 00 02 01 00 04 01 00 40 00 00
10: f1 ff 00 00 e5 ff 00 00 a9 ff 00 00 e5 fb 00 00
20: 81 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 01 00 be ff 00 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: ee 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: f5 6c 43 00 c4 f3 4f 00 f9 13 40 00 c4 f3 4f 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 5a 10 33 4d 07 00 00 02 01 00 04 01 00 40 00 00
90: f1 ff 00 00 e5 ff 00 00 a9 ff 00 00 e5 fb 00 00
a0: 81 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 01 00 be ff 00 00 00 00 00 00 00 00 0b 01 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: ee 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: f5 6c 43 00 c4 f3 4f 00 f9 13 40 00 c4 f3 4f 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Regards,
Andre Hedrick
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html