--------------298D92826D147311D707ECC
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I can't seem to get anything past 2.1.101 kernels to make it to the init
runlevel stage of bootup what with what I suspect is a conflict with the
SCSI driver and my old NEC 210 CD-ROM drive. I was hoping that someone
out there with far more knowledge than I have could give me an idea what
is causing it to lock up solid. I used the output of 'dmesg' with my
highest revision runnable kernel that I am currently using to give an
idea of what happens. The first attachment series is where it freezes,
and the second attachment is where it ordinarily goes from there (as
with my current kernel). The third and last attachment is my
/usr/src/linux/.config
Thanks for any help you can lend if you would.
-Scott
--------------298D92826D147311D707ECC
Content-Type: text/plain; charset=us-ascii; name="scsi"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="scsi"
Linux version 2.1.101 (root@ummagumma) (gcc version egcs-2.91.42 19980621 (gcc2 ss-980502 experimental)) #4 Wed Aug 5 14:43:36 EST 1998
ide_setup: ide0=dtc2278
ide_setup: ide0=autotune
ide_setup: ide1=autotune
ide_setup: ide2=noprobe
ide_setup: hdd=noprobe
Console: 8 point font, 400 scans
Console: colour VGA+ 80x50, 1 virtual console (max 63)
Calibrating delay loop... 66.56 BogoMIPS
Memory: 46916k/49152k available (972k kernel code, 392k reserved, 844k data, 28k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Swansea University Computer Society NET3.039 for Linux 2.1
NET3: Unix domain sockets 0.16 for Linux NET3.038.
Swansea University Computer Society TCP/IP for NET3.037
IP Protocols: ICMP, UDP, TCP
CPU: AMD Am5x86-WB stepping 04
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
POSIX conformance testing by UNIFIX
Starting kswapd v 1.5
parport0: PC-style at 0x3bc [SPP,PS2]
parport1: PC-style at 0x278 [SPP,PS2,EPP]
Serial driver version 4.25 with enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
lp0: using parport0 (polling).
lp1: using parport1 (polling).
Sound initialization started
<Pro AudioSpectrum 16D rev 255> at 0x388 irq 10 dma 5
<Sound Blaster (8 BIT/MONO ONLY) (2.0)> at 0x220 irq 5 dma 1,6
<Yamaha OPL3 FM> at 0x388
Sound initialization complete
js0: 3-axis 3-button joystick at 0x201
hda: Conner Peripherals 340MB - CFA340A, ATA DISK drive
hdb: WDC AC21600H, ATA DISK drive
hdc: Maxtor 7080 AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15 (serialized with ide0)
hda: Conner Peripherals 340MB - CFA340A, 327MB w/64kB Cache, CHS=665/16/63
hdb: WDC AC21600H, 1549MB w/128kB Cache, CHS=787/64/63
hdc: Maxtor 7080 AT, 81MB w/18kB Cache, CHS=981/10/17
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pas16: WARNING: Can't use same irq as sound driver -- interrupts disabled
scsi0 : interrupts not enabled. for better interactive performance,
scsi0 : please jumper the board for a free IRQ.
scsi0 : at 0x0388 interrupts disabled options CAN_QUEUE=32 CMD_PER_LUN=2 release=3 generic options AUTOPROBE_IRQ AUTOSENSE PSEUDO DMA UNSAFE generic release=7
scsi0 : Pro Audio Spectrum-16 SCSI
scsi : 1 host.
--------------298D92826D147311D707ECC
Content-Type: text/plain; charset=us-ascii; name="cd-rom"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="cd-rom"
Vendor: NEC Model: CD-ROM DRIVE:210 Rev: 1.0
Type: CD-ROM ANSI SCSI revision: 01
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
scsi : detected 1 SCSI cdrom total.
sr0: scsi3-mmc drive: 0x/0x cdda caddy
Uniform CD-ROM driver Revision: 2.12
PPP: version 2.3.5 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1 hdb2
hdc: hdc1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 28k freed
Adding Swap: 16124k swap-space (priority -1)
--------------298D92826D147311D707ECC
Content-Type: text/plain; charset=us-ascii; name="out"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="out"
CONFIG_EXPERIMENTAL=y
CONFIG_M586=y
CONFIG_MODULES=y
CONFIG_KMOD=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_VIDEO_SELECT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDE_CHIPSETS=y
CONFIG_BLK_DEV_DTC2278=y
CONFIG_PARIDE_PARPORT=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_PAS16=y
CONFIG_NETDEVICES=y
CONFIG_PPP=y
CONFIG_EXT2_FS=y
CONFIG_ISO9660_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_PRINTER=y
CONFIG_JOYSTICK=y
CONFIG_SOUND=y
CONFIG_PAS=y
CONFIG_PAS_IRQ=10
CONFIG_PAS_DMA=5
CONFIG_PAS_JOYSTICK=y
CONFIG_SB=y
CONFIG_SB_BASE=220
CONFIG_SB_IRQ=5
CONFIG_SB_DMA=1
CONFIG_SB_DMA2=6
CONFIG_SB_MPU_BASE=330
CONFIG_SB_MPU_IRQ=-1
CONFIG_YM3812=y
CONFIG_VGA_CONSOLE=y
--------------298D92826D147311D707ECC--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html