Same Problem over here with an NCR810 rev. 0x1
thnx
Michael
On Tue, 21 Jul 1998, Richard Gooch wrote:
> Hi, all. I just tried 2.1.110 on a machine with the NCR 53c810 SCSI
> card, and I get the following messages:
>
> ncr53c8xx: at PCI bus 0, device 16, function 0
> ncr53c8xx: 53c810 detected
> ncr53c810-0: rev=0x02, base=0xe4000000, io_port=0x6500, irq=9
> ncr53c810-0: can't map memory mapped IO region
> ncr53c810-0: detaching
>
> and since the root FS is accessed through this controller, the machine
> is rooted :-( :-(
>
> On the other hand, with 2.1.104, I get the following:
>
> ncr53c8xx: at PCI bus 0, device 16, function 0
> ncr53c8xx: 53c810 detected
> ncr53c810-0: rev=0x02, base=0xe4000000, io_port=0x6500, irq=9
> ncr53c810-0: ID 7, Fast-10, Parity Checking
> ncr53c810-0: restart (scsi reset).
> scsi0 : ncr53c8xx - revision 2.5f
> scsi : 1 host.
>
> which is definately preferred! Note that 2.1.110 has revision 3.0g of
> the NCR driver.
>
> Regards,
>
> Richard....
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html