I'll watch this for a few more hours/days, then try Ingo's memleak
detector (2.0.33 plus e2compr 0.3.7 patch compiled with gcc 2.7.2)
#
# Automatically generated by make menuconfig: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KERNELD=y
#
# General setup
#
# CONFIG_MATH_EMULATION is not set
CONFIG_NET=y
# CONFIG_MAX_16M is not set
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_JAVA=m
CONFIG_KERNEL_ELF=y
CONFIG_M586=y
#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_BLK_DEV_IDE_PCMCIA is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_TRITON=y
CONFIG_IDE_CHIPSETS=y
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_PROMISE is not set
CONFIG_BLK_DEV_QD6580=y
CONFIG_BLK_DEV_UMC8672=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_STRIPED=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_FIREWALL=y
CONFIG_NET_ALIAS=y
CONFIG_INET=y
CONFIG_IP_FORWARD=y
CONFIG_IP_MULTICAST=y
CONFIG_SYN_COOKIES=y
CONFIG_RST_COOKIES=y
CONFIG_IP_FIREWALL=y
CONFIG_IP_FIREWALL_VERBOSE=y
CONFIG_IP_MASQUERADE=y
CONFIG_IP_MASQUERADE_IPAUTOFW=y
CONFIG_IP_MASQUERADE_ICMP=y
CONFIG_IP_TRANSPARENT_PROXY=y
CONFIG_IP_ALWAYS_DEFRAG=y
CONFIG_IP_ACCT=y
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
CONFIG_IP_MROUTE=y
CONFIG_IP_ALIAS=m
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=m
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
CONFIG_IPX=m
# CONFIG_ATALK is not set
# CONFIG_AX25 is not set
CONFIG_BRIDGE=y
# CONFIG_NETLINK is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_TAGGED_QUEUEING=y
CONFIG_OVERRIDE_CMDS=y
CONFIG_AIC7XXX_CMDS_PER_LUN=8
CONFIG_AIC7XXX_PAGE_ENABLE=y
CONFIG_AIC7XXX_PROC_STATS=y
CONFIG_AIC7XXX_RESET_DELAY=15
CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GENERIC_NCR5380=m
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
CONFIG_SCSI_G_NCR5380_PORT=y
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_NCR53C7xx=m
# CONFIG_SCSI_NCR53C7xx_sync is not set
CONFIG_SCSI_NCR53C7xx_FAST=y
CONFIG_SCSI_NCR53C7xx_DISCONNECT=y
CONFIG_SCSI_NCR53C8XX=m
# CONFIG_SCSI_NCR53C8XX_NVRAM_DETECT is not set
CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE=y
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4
CONFIG_SCSI_NCR53C8XX_SYNC=5
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
CONFIG_SCSI_PPA=m
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_T128=m
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_GDTH is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_RADIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=m
CONFIG_VORTEX=m
# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
# CONFIG_ULTRA is not set
# CONFIG_ULTRA32 is not set
# CONFIG_SMC9194 is not set
CONFIG_NET_ISA=y
# CONFIG_AT1700 is not set
# CONFIG_E2100 is not set
# CONFIG_DEPCA is not set
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
# CONFIG_FMV18X is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_HP100 is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=m
# CONFIG_NI52 is not set
# CONFIG_NI65 is not set
# CONFIG_SEEQ8005 is not set
# CONFIG_SK_G16 is not set
CONFIG_NET_EISA=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
CONFIG_EEXPRESS_PRO100B=m
# CONFIG_DE4X5 is not set
CONFIG_DEC_ELCP=m
# CONFIG_DGRS is not set
# CONFIG_ZNET is not set
# CONFIG_NET_POCKET is not set
# CONFIG_TR is not set
# CONFIG_FDDI is not set
# CONFIG_ARCNET is not set
#
# ISDN subsystem
#
CONFIG_ISDN=m
# CONFIG_ISDN_PPP is not set
# CONFIG_ISDN_AUDIO is not set
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
# CONFIG_ISDN_DRV_HISAX is not set
# CONFIG_ISDN_DRV_SC is not set
# CONFIG_ISDN_DRV_AVMB1 is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Filesystems
#
CONFIG_QUOTA=y
CONFIG_MINIX_FS=y
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_COMPRESS=y
CONFIG_EXT2_IND_BITMAP=y
CONFIG_EXT2_COMPR_X86_CODE=y
# CONFIG_GZ_HACK is not set
CONFIG_EXT2_USE_LZV1=y
# CONFIG_EXT2_USE_LZRW3A is not set
CONFIG_EXT2_USE_GZIP=y
CONFIG_EXT2_USE_BZIP2=y
CONFIG_EXT2_DEFAULT_COMPR_METHOD_GZIP6=y
CONFIG_EXT2_DEFAULT_CLUSTER_BITS_5=y
# CONFIG_XIA_FS is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_CONFIG=y
CONFIG_NFS_FS=m
CONFIG_SMB_FS=m
CONFIG_SMB_WIN95=y
CONFIG_NCP_FS=m
CONFIG_ISO9660_FS=m
CONFIG_HPFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_AUTOFS_FS=m
# CONFIG_AFFS_FS is not set
CONFIG_UFS_FS=m
CONFIG_BSD_DISKLABEL=y
CONFIG_SMD_DISKLABEL=y
#
# Character devices
#
CONFIG_SERIAL=m
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
CONFIG_PRINTER=m
# CONFIG_SPECIALIX is not set
CONFIG_MOUSE=y
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
CONFIG_PSMOUSE=m
# CONFIG_82C710_MOUSE is not set
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
CONFIG_FTAPE=m
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_POWER_OFF is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WDT is not set
CONFIG_SOFT_WATCHDOG=m
# CONFIG_PCWATCHDOG is not set
CONFIG_RTC=y
#
# Sound
#
CONFIG_SOUND=m
CONFIG_LOWLEVEL_SOUND=y
# CONFIG_ACI_MIXER is not set
#
# Kernel hacking
#
# CONFIG_PROFILE is not set
Jul 8 10:53:01 arpa kernel: Cannot find map file.
Jul 8 10:53:01 arpa kernel: Console: 16 point font, 400 scans
Jul 8 10:53:01 arpa kernel: Console: colour VGA+ 80x25, 1 virtual console (max 63)
Jul 8 10:53:01 arpa kernel: pcibios_init : BIOS32 Service Directory structure at 0x000fad10
Jul 8 10:53:01 arpa kernel: pcibios_init : BIOS32 Service Directory entry at 0xfb190
Jul 8 10:53:01 arpa kernel: pcibios_init : PCI BIOS revision 2.10 entry at 0xfb1c0
Jul 8 10:53:01 arpa kernel: Probing PCI hardware.
Jul 8 10:53:01 arpa kernel: Calibrating delay loop.. ok - 39.83 BogoMIPS
Jul 8 10:53:01 arpa kernel: Memory: 63060k/65536k available (804k kernel code, 384k reserved, 1288k data)
Jul 8 10:53:01 arpa kernel: Swansea University Computer Society TCP/IP for NET3.034
Jul 8 10:53:01 arpa kernel: IP Protocols: IGMP, ICMP, UDP, TCP
Jul 8 10:53:01 arpa kernel: Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Jul 8 10:53:01 arpa kernel: Checking 'hlt' instruction... Ok.
Jul 8 10:53:01 arpa kernel: alias mapping IDT readonly ... ... done
Jul 8 10:53:01 arpa kernel: Linux version 2.0.33 (root@lmserv2) (gcc version 2.7.2) #13 Wed Jul 8 10:32:58 MET DST 1998
Jul 8 10:53:01 arpa kernel: *** Installed patches:
Jul 8 10:53:01 arpa kernel: ext2 file system compression patch 0.3.7 (2.0.34)
Jul 8 10:53:01 arpa kernel: Linux Unofficial Patch Printout (2.0.30)
Jul 8 10:53:01 arpa kernel:
Jul 8 10:53:01 arpa kernel: /proc/config.gz (N.J. Leon for 2.1.104 adapted by P.T.Breuer for 2.0.25)
Jul 8 10:53:01 arpa kernel:
Jul 8 10:53:01 arpa kernel: *** End of Patches
Jul 8 10:53:01 arpa kernel: Starting kswapd v 1.4.2.2
Jul 8 10:53:01 arpa kernel: APM BIOS version 1.2 Flags 0x07 (Driver version 1.2)
Jul 8 10:53:01 arpa kernel: Entry f000:803e cseg16 f000 dseg fdfc cseg len ef7f, dseg len 0
Jul 8 10:53:01 arpa kernel: Connection version 1.1
Jul 8 10:53:01 arpa kernel: AC on line, battery status unknown, battery life unknown
Jul 8 10:53:01 arpa kernel: battery flag 0x80, battery life unknown
Jul 8 10:53:01 arpa kernel: Real Time Clock Driver v1.07
Jul 8 10:53:01 arpa kernel: Ramdisk driver initialized : 16 ramdisks of 4096K size
Jul 8 10:53:01 arpa kernel: ide: i82371 PIIX (Triton) on PCI bus 0 function 57
Jul 8 10:53:01 arpa kernel: ide0: BM-DMA at 0xf000-0xf007
Jul 8 10:53:01 arpa kernel: ide1: BM-DMA at 0xf008-0xf00f
Jul 8 10:53:01 arpa kernel: hda: FX001DE, ATAPI CDROM drive
Jul 8 10:53:01 arpa kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 8 10:53:01 arpa kernel: md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8
Jul 8 10:53:01 arpa kernel: scsi0 : BusLogic BT-956C
Jul 8 10:53:01 arpa kernel: scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Jul 8 10:53:01 arpa kernel: scsi : 2 hosts.
Jul 8 10:53:01 arpa kernel: Vendor: SEAGATE Model: ST15230W Rev: 0638
Jul 8 10:53:01 arpa kernel: Type: Direct-Access ANSI SCSI revision: 02
Jul 8 10:53:01 arpa kernel: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Jul 8 10:53:01 arpa kernel: Vendor: SEAGATE Model: ST15230W Rev: 0638
Jul 8 10:53:01 arpa kernel: Type: Direct-Access ANSI SCSI revision: 02
Jul 8 10:53:01 arpa kernel: Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Jul 8 10:53:01 arpa kernel: scsi : detected 2 SCSI disks total.
Jul 8 10:53:01 arpa kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 8386733 [4095 MB] [4.1 GB]
Jul 8 10:53:01 arpa kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8386733 [4095 MB] [4.1 GB]
Jul 8 10:53:01 arpa kernel: Partition check:
Jul 8 10:53:01 arpa kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
Jul 8 10:53:01 arpa kernel: sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 > sdb4
Jul 8 10:53:01 arpa kernel: VFS: Mounted root (ext2 filesystem) readonly.
Jul 8 10:53:01 arpa kernel: Adding Swap: 72288k swap-space (priority 1)
Jul 8 10:53:01 arpa kernel: Adding Swap: 72256k swap-space (priority 1)
Jul 8 10:53:01 arpa kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Jul 8 10:53:01 arpa kernel: hda: media changed
Jul 8 10:53:01 arpa kernel: hda : tray open or drive not ready
Jul 8 10:53:01 arpa last message repeated 3 times
Jul 8 10:53:01 arpa kernel: hda : tray open
Jul 8 10:53:01 arpa kernel: end_request: I/O error, dev 03:00, sector 64
Jul 8 10:53:01 arpa kernel: isofs_read_super: bread failed, dev 03:00 iso_blknum 16 block 32
Jul 8 10:53:01 arpa kernel: hda : tray open or drive not ready
Jul 8 10:53:01 arpa last message repeated 3 times
Jul 8 10:53:01 arpa kernel: hda : tray open
Jul 8 10:53:03 arpa mountd[163]: Eek: user nobody has uid -1. Using -2 instead.
Jul 8 10:53:01 arpa kernel: end_request: I/O error, dev 03:00, sector 64
Jul 8 10:53:01 arpa kernel: isofs_read_super: bread failed, dev 03:00 iso_blknum 16 block 32
Jul 8 10:53:01 arpa kernel: eth0: 3c509 at 0x210 tag 1, 10baseT port, address 00 60 97 69 77 5e, IRQ 5.
Jul 8 10:53:01 arpa kernel: 3c509.c:1.12 6/4/97 becker@cesdis.gsfc.nasa.gov
Jul 8 10:53:01 arpa kernel: eth0: Setting Rx mode to 1 addresses.
Jul 8 10:53:04 arpa nfsd[165]: Eek: user nobody has uid -1. Using -2 instead.
Jul 8 10:53:14 arpa kernel: Software Watchdog Timer: 0.04, timer margin: 60 sec
Jul 8 10:53:55 arpa in.bootpd[272]: udp/bootpc: unknown service -- assuming port 68
Jul 8 10:54:51 arpa syslog: /usr/sbin/powerd[303]: Failed to redirect stderr
Jul 8 10:54:53 arpa syslog: /usr/sbin/powerd[303]: We are multi user
Jul 8 10:55:13 arpa syslog: /usr/sbin/powerd[303]: Line change detected
Jul 8 12:10:31 arpa kernel: nfs_rpc_verify: RPC call failed: 5
Jul 8 12:26:32 arpa kernel: nfs_rpc_verify: RPC call failed: 5
Jul 8 12:36:55 arpa kernel: hda : tray open or drive not ready
Jul 8 12:36:55 arpa kernel: hda : tray open or drive not ready
Jul 8 12:55:50 arpa kernel: eth0: transmit timed out, Tx_status 88 status 2004 Tx FIFO room 1356.
Jul 8 13:00:43 arpa kernel: eth0: transmit timed out, Tx_status 88 status 2004 Tx FIFO room 1416.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu