I just got an Advansys ABP-980U SCSI controller. The thing uses 4 IRQs
(its basically 4 controllers on one card with a PCI bridge chip). Here's
the problem - although I have 6 IRQs free - both the VGA board and the
Intel Etherexpress 100 insist on sharing IRQs with the Advansys card. (Or
is it the other way around) I've tried resetting BIOS, CMOS, you name it.
Is there a manual way to manipulate these settings such as through
/dev/nvram? Any other ideas?
Best Regards,
Y.
SuperMicro P6DOF
Advansys ABP-980U
#9 Vision 771
Intel Etherexpress 100B
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu