>
>>Back to 2.1.59... too many errors.
>>Later interrupts:
>
>>Oct 28 08:45:24 fortuny kernel: ISDN subsystem Rev:
>>1.44/1.41/1.44/1.27/1.8 load ed
>>Oct 28 08:45:24 fortuny kernel: HiSax: Driver for Siemens chip set ISDN
>>cards Oct 28 08:45:24 fortuny kernel: HiSax: Version 2.1
>>Oct 28 08:45:24 fortuny kernel: HiSax: Revisions 1.15/1.10/1.10/1.30/1.8
>>Oct 28 08:45:24 fortuny kernel: HiSax: Card 1 Protocol EDSS1 Id=hisax0 (0)
>>Oct 28 08:45:24 fortuny kernel: HiSax: Teles IO driver Rev. 1.11 Oct 28
>>08:45:24 fortuny kernel: HiSax: Creatix/Teles PnP config irq:3 isac:120
>>cfg:0
>>Oct 28 08:45:24 fortuny kernel: HiSax: hscx A:180 hscx B:1a0 Oct 28
>>08:45:24 fortuny kernel: Teles3: HSCX version A: V2.1 B: V2.1 Oct 28
>>08:45:24 fortuny kernel: Teles3: ISAC 2086/2186 V1.1 Oct 28 08:45:24
>>fortuny kernel: Teles: Spurious interrupt! Oct 28 08:45:24 fortuny kernel:
>>Teles: Spurious interrupt!
> ^^^^^^^^^^^^^^^^^^^^^^^
> Did it do that before?
No. With 2.1.59 I donīt get that message.
Anyway the cards get properly set up... but havenīt tried if the make
the ISDN call :(
>>As I lost lots of data in a 2.1.5? kernel due to dentriesī errors I prefer
>>to stay in .59.
>
> Fair enough. If you need quotas then you need something other than
> 2.1.60.
Quotas donīt compile either in 2.1.59. But havenīt tried your patch in
2.1.59.
////
Equip Webmaster (@ @) Ready Soft
------------------------oOO--(_)--OOo------------------------
Et portem el mon a casa