Before installing new kernel my routing table:
Destination Gateway Genmask Flags MSS Window Use
Iface
192.168.100.1 * 255.255.255.255 UH 1500 0 0
eth1
193.192.118.10 * 255.255.255.255 UH 1500 0 0
ppp0
192.168.1.0 * 255.255.255.0 U 1500 0 3
eth0
192.168.100.0 * 255.255.255.0 U 1500 0 4
eth1
192.168.100.0 192.168.100.1 255.255.255.0 UG 1500 0 0
eth1
192.168.2.0 192.168.1.3 255.255.255.0 UG 1500 0 3
eth0
192.168.3.0 192.168.100.25 255.255.255.0 UG 1500 0 1
eth1
127.0.0.0 * 255.0.0.0 U 3584 0 2
lo
default * * U 1500 0 13
ppp0
After installing linux kernel (2.1.55) on my Slackware 3.0
Destination Gateway Genmask Flags MSS Window Use
Iface
192.168.100.1 * 255.255.255.255 U 1500 0 0
eth1 -- Host not set
193.192.118.10 * 255.255.255.255 U 1500 0 0
ppp0 --- twice ???
193.192.118.10 * 255.255.255.255 U 1500 0 0
ppp0 --/
192.168.100.0 * 255.255.255.0 U 1500 0 0
eth1
192.168.3.0 192.168.100.25 255.255.255.0 UG 1500 0 0
eth1
192.168.2.0 192.168.1.3 255.255.255.0 UG 1500 0 0
eth0
192.168.1.0 * 255.255.255.0 U 1500 0 0
eth0
default * * U 1500 0 0
ppp0
WHY?????
Sorry, my English is no good!
Danke.
Riedel Alexander