I'm using a Tekram DC390 under 2.0.30.
The controller, the disk and the jaz are new.
Should I worry?
Attached devices:
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: QUANTUM Model: FIREBALL_TM2110S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: iomega Model: jaz 1GB Rev: J^77
Type: Direct-Access ANSI SCSI revision: 02
Jun 30 19:30:21 bianca2 kernel: lp1 at 0x0378, (polling)
Jul 1 03:00:01 bianca2 kernel: Device not ready. Make sure there is a
disc in the drive.
Jul 1 03:00:01 bianca2 kernel: VFS: Mounted device 08:14 - tssk, tssk
Jul 1 03:00:01 bianca2 kernel: VFS: inode busy on removed device 08:14
Jul 1 03:00:01 bianca2 kernel: VFS: inode busy on removed device 08:14
Jul 1 03:00:01 bianca2 kernel: Device busy for revalidation (usage=1)
Jul 1 03:00:01 bianca2 kernel: scsidisk I/O error: dev 08:14, sector 136886
Jul 1 03:00:02 bianca2 last message repeated 9 times
Jul 1 03:00:02 bianca2 kernel: scsidisk I/O error: dev 08:14, sector 2
Jul 1 03:00:02 bianca2 kernel: scsidisk I/O error: dev 08:14, sector 6
Jul 1 03:00:02 bianca2 kernel: scsidisk I/O error: dev 08:14, sector 770060
Jul 1 03:00:02 bianca2 kernel: scsidisk I/O error: dev 08:14, sector 18
Jul 1 03:00:03 bianca2 kernel: Kernel panic: EXT2-fs panic
(device 08:14): ext2_write_inode: unable to read i-node block
- inode=12, block=9
Jul 1 03:00:03 bianca2 kernel:
Jul 1 03:00:03 bianca2 kernel: scsidisk I/O error: dev 08:14, sector 2
Jul 1 06:55:04 bianca2 kernel: scsidisk I/O error: dev 08:14, sector 528
Jul 1 06:55:04 bianca2 kernel: EXT2-fs error (device 08:14): ext2_readdir:
directory #2 contains a hole at offset 0
Jul 1 09:02:47 bianca2 syslogd 1.3-0#11: restart.
Jul 1 09:02:47 bianca2 kernel: klogd 1.3-0, log source = /proc/kmsg started.