aborting command due to timeout : pid 669, scsi0, channel 0, id 1, lun 0
0x0a 0e 68 16 02 00
aic7xxx: (abort) Aborting scb 2, TCL 1/0/0
scsi : aborting command due to timeout : pid 670, scsi0, channel 0, id 1,
lun 0
0x0a 09 a9 70 02 00
aic7xxx: (abort) Aborting scb 0, TCL 1/0/0
scsi : aborting command due to timeout : pid 669, scsi0, channel 0, id 1,
lun 0
0x0a 0e 68 16 02 00
aic7xxx: (abort) Aborting scb 2, TCL 1/0/0
SCSI host 0 abort (pid 669) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
aic7xxx: (reset) target/channel 1/0
aic7xxx: (abort_reset) scb state 0x1, Data-Out phase, SCSISIGI = 0x4
aic7xxx: (reset_device) target/channel -1/A, active_scb 2
aic7xxx: (match_scb) comparing target/channel -1/A to scb 1/A
aic7xxx: (reset_device) aborting SCB 0, TCL=1/0/0
aic7xxx: (match_scb) comparing target/channel -1/A to scb 1/A
aic7xxx: (match_scb) comparing target/channel -1/A to scb 1/A
aic7xxx: (reset_channel) Resetting current channel A
aic7xxx: (reset_channel) Channel reset, sequencer restarted
aic7xxx: (done_aborted_scbs) Aborting scb 0, TCL=1/0/0
aic7xxx: (done_aborted_scbs) Aborting scb 2, TCL=1/0/0
scsi0: Target 1, channel A, now synchronous at 10.0MHz, offset 15.
[about 10 minutes]
scsi0: Target 0, channel A, now synchronous at 10.0MHz, offset 15.
the system survived that... a few months ago I got some hangups and oopses...
but then most numbers (target,scb,tcl) were all zero...
(from logs... notice the pid... always right after booting: )
Apr 13 20:36:49 bx2 kernel: Linux version 2.1.33 (root@bx2) (gcc version
2.7.2.1.f.1) #80-bx Sat Apr 12 11:00:09 EET DST 1997
Apr 13 20:37:05 bx2 kernel: scsi : aborting command due to timeout : pid
322, scsi0, channel 0, id 1, lun 0 0x08 0f a7 52 0a 00
Apr 13 20:37:20 bx2 kernel: scsi : aborting command due to timeout : pid
322, scsi0, channel 0, id 1, lun 0 0x08 0f a7 52 0a 00
Apr 13 20:37:56 bx2 kernel: scsi : aborting command due to timeout : pid
352, scsi0, channel 0, id 1, lun 0 0x08 0e 68 90 02 00
Apr 13 20:38:11 bx2 kernel: scsi : aborting command due to timeout : pid
352, scsi0, channel 0, id 1, lun 0 0x08 0e 68 90 02 00
Apr 13 20:41:36 bx2 kernel: Linux version 2.1.32 (root@bx2) (gcc version
2.7.2.1.f.1) #78-bx Sun Apr 6 09:05:47 EET DST 1997
Apr 14 17:01:16 bx2 kernel: Linux version 2.1.32 (root@bx2) (gcc version
2.7.2.1.f.1) #78-bx Sun Apr 6 09:05:47 EET DST 1997
Apr 15 15:06:34 bx2 kernel: Linux version 2.0.29 (root@bx2) (gcc version
2.7.2.1.f.1) #50-bx Tue Mar 4 20:25:39 EET 1997
Apr 16 21:49:01 bx2 kernel: Linux version 2.1.32 (root@bx2) (gcc version
2.7.2.1.f.1) #78-bx Sun Apr 6 09:05:47 EET DST 1997
Apr 19 08:54:12 bx2 kernel: Linux version 2.1.32 (root@bx2) (gcc version
2.7.2.1.f.1) #78-bx Sun Apr 6 09:05:47 EET DST 1997
Apr 19 09:30:29 bx2 kernel: Linux version 2.0.29 (root@bx2) (gcc version
2.7.2.1.f.1) #50-bx Tue Mar 4 20:25:39 EET 1997
Apr 19 09:35:30 bx2 kernel: scsi : aborting command due to timeout : pid
669, scsi0, channel 0, id 1, lun 0 0x0a 0e 68 16 02 00
Apr 19 09:35:40 bx2 kernel: scsi : aborting command due to timeout : pid
670, scsi0, channel 0, id 1, lun 0 0x0a 09 a9 70 02 00
Apr 19 09:35:46 bx2 kernel: scsi : aborting command due to timeout : pid
669, scsi0, channel 0, id 1, lun 0 0x0a 0e 68 16 02 00