> Hello everyone!
>
> Recently I have just upgrade my linux box from RH303 1.2.13 to 2.0.28.
> After I have compile my kernel code and test it on disk.
> The result was...
>
> .......
> hdb: IRQ probe failed
> ......
> ......
> ide0: UNABLE TO GET IRQ 14
> ......
>
This is your problem. The new kernel may be starting drivers in a
slightly different order so you may not have see this before. Your
IDE disk seems to want IRQ 14 (which has already been snarfed by something
else). Check you BIOS setup.
Cheers,
Dick Johnson
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Richard B. Johnson
Project Engineer
Analogic Corporation
Voice : (508) 977-3000 ext. 3754
Fax : (508) 532-6097
Modem : (508) 977-6870
Ftp : ftp@boneserver.analogic.com
Email : rjohnson@analogic.com, johnson@analogic.com
Penguin : Linux version 2.1.26 on an i586 machine (66.15 BogoMips).
Warning : It's hard to remain at the trailing edge of technology.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-