I'm running 2.1.25, modutils-2.1.23, binutils 2.7.0.3, libc 5.4.17,
ld.so 1.8.5.
Ooops, ksymoops and .config follow. It's been like this since 2.1.24 at
least.
Unable to handle kernel paging request at virtual address 4bccc019
current->tss.cr3 = 00fec000,
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c01169d1>]
EFLAGS: 00010203
eax: 67b00000 ebx: c019a7d8 ecx: 0000003b edx: 4bccc019
esi: 4bccc019 edi: c0feef84 ebp: c0186c56 esp: c0feef5c
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 123, process nr: 18, stackpage=c0fee000)
Stack: c0fcc414 00000000 bffffdfc bffffda4 c0feef80 c0feef84 c0feef85 00000000
00000001 67b00000 00000023 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Call Trace: [<c010a3f6>]
Code: ac aa 84 c0 75 f7 f3 aa c6 44 24 63 00 ba 40 00 00 00 a1 e4
Using `/usr/src/linux/System.map' to map addresses to symbols.
>>EIP: c01169d1 <sys_get_kernel_syms+11d/18c>
Code: c01169d1 <sys_get_kernel_syms+11d/18c> lodsb %ds:(%esi),%al
Code: c01169d2 <sys_get_kernel_syms+11e/18c> stosb %al,%es:(%edi)
Code: c01169d3 <sys_get_kernel_syms+11f/18c> testb %al,%al
Code: c01169d5 <sys_get_kernel_syms+121/18c> jne fffffffd <_EIP+fffffffd>
Code: c01169d7 <sys_get_kernel_syms+123/18c> repz stosb %al,%es:(%edi)
Code: c01169d9 <sys_get_kernel_syms+125/18c> movb $0x0,0x63(%esp,1)
Code: c01169de <sys_get_kernel_syms+12a/18c> movl $0x40,%edx
Code: c01169e3 <sys_get_kernel_syms+12f/18c> movl 0x909000e4,%eax
Code: c01169e8 <sys_get_kernel_syms+134/18c> nop
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y
#
# General setup
#
# CONFIG_MATH_EMULATION is not set
CONFIG_NET=y
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
# CONFIG_MCA is not set
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_JAVA=m
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M686 is not set
CONFIG_VIDEO_SELECT=y
#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_TRITON is not set
# CONFIG_IDE_CHIPSETS is not set
#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_STRIPED=m
CONFIG_BLK_DEV_RAM=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_EZ is not set
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
# CONFIG_NETLINK is not set
# CONFIG_FIREWALL is not set
# CONFIG_NET_ALIAS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ACCT is not set
#
# (it is safe to leave these untouched)
#
# CONFIG_INET_PCTCP is not set
# CONFIG_INET_RARP is not set
CONFIG_PATH_MTU_DISCOVERY=y
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
# CONFIG_IPV6 is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_AX25 is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
# CONFIG_WAN_ROUTER is not set
#
# SCSI support
#
CONFIG_SCSI=m
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_G_NCR5380_PORT=y
# CONFIG_SCSI_G_NCR5380_MEM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_NCR53C7xx=m
CONFIG_SCSI_NCR53C7xx_sync=y
CONFIG_SCSI_NCR53C7xx_FAST=y
CONFIG_SCSI_NCR53C7xx_DISCONNECT=y
CONFIG_SCSI_NCR53C8XX=m
CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE=y
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4
CONFIG_SCSI_NCR53C8XX_SYNC=5
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_FDDI is not set
# CONFIG_DLCI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
#
# CCP compressors for PPP are only built as modules.
#
# CONFIG_NET_RADIO is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_TR is not set
# CONFIG_SHAPER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_MINIX_FS=m
CONFIG_EXT2_FS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_PROC_FS=y
CONFIG_NFS_FS=m
CONFIG_SMB_FS=m
CONFIG_SMB_WIN95=y
CONFIG_ISO9660_FS=m
CONFIG_HPFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_UFS_FS is not set
#
# Character devices
#
CONFIG_SERIAL=y
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
# CONFIG_ESPSERIAL is not set
CONFIG_PRINTER=m
CONFIG_MOUSE=y
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
CONFIG_PSMOUSE=m
# CONFIG_82C710_MOUSE is not set
CONFIG_UMISC=y
# CONFIG_QIC02_TAPE is not set
# CONFIG_FTAPE is not set
# CONFIG_APM is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WDT is not set
CONFIG_SOFT_WATCHDOG=m
# CONFIG_PCWATCHDOG is not set
CONFIG_RTC=y
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_LOWLEVEL_SOUND is not set
#
# Kernel hacking
#
# CONFIG_PROFILE is not set
-- [======================================================================] [ Kevin Lentin Email: K.Lentin@cs.monash.edu.au ] [ finger kevinl@fangorn.cs.monash.edu.au for PGP public key block. ] [ KeyId: 06808EED FingerPrint: 6024308DE1F84314 811B511DBA6FD596 ] [======================================================================]