Here, in case it helps anyone help me, is the FreeBSD boot messages from this
machine. Can anyone tell me what the proper linux kernel and boot parameters
are for this machine? BusLogic scsi 2.0.0/25 kernels just oops in the boot
sequence!
(Yes - I am desperate, and many apologies ...)
Peter T. Breuer
,---------------------------------------------------------------------------
|Departamento de Ingenieria de Sistemas Telematicos, Universidad Politecnica
|de Madrid, Escuela Tecnica Superior de Ingenieros de Telecomunicacion,
|Ciudad Universitaria, E--28040 Madrid, SPAIN.
|Tel. Office : +34 (1)336 6831
| Fax : +34 (1)543 2077 or 336 7333
|Internet : <ptb@eng.cam.ac.uk, ptb@comlab.ox.ac.uk, ptb@dit.upm.es>
| URL : http://www.dit.upm.es:80/~ptb/
`---------------------------------------------------------------------------
ep1 at 0x300-0x30f irq 12 on isa
ep1: utp[*UTP*] address 00:a0:24:88:d5:59 irq 12
npx0 on motherboard
npx0: INT 16 interface
pcibus_setup(1): mode1res=0x80000000 (0x80000000), mode2res=0xff (0x0e)
pcibus_setup(2): mode1res=0x80000000 (0x80000000)
pcibus_check: device 0 is there (id=08911060)
Probing for devi\M^?\^Che PCI bus:
configuration mode 1 allows 32 devices.
pci0:0: UMC, device=0x0891, class=bridge (host) [no driver assigned]
vga0 <VGA-compatible display device> rev 0 int a irq 10 on pci0:12
mapreg[10] type=0 addr=f0000000 size=800000.
pci0:13: Bus Logic, device=0x1040, class=storage (scsi) [no driver assigned]
map(10): io(6000)
pci0:18: UMC, device=0x886a, class=bridge (isa) [no driver assigned]
pci0: uses 8388608 bytes of memory from f0000000 upto f07fffff.
changing root device to sd1a
BIOS Geometries:
0:0209fe3f 0..521=522 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03ff3f20 0..1023=1024 cylinders, 0..63=64 heads, 1..32=32 sectors
0 accounted for
sd1s1: type 0xa5, start 32, end = 8386559, size 8386528 : OK
sd0s1: type 0xa5, start 63, end = 8385929, size 8385867 : OK
sd0s1: type 0xa5, start 63, end = 8385929, size 8385867 : OK
syncing disks... done
Rebooting...
FreeBSD 2.1.0-RELEASE #0: Fri Sep 27 12:17:38 MET DST 1996
root@bsd1.it.uc3m.es:/usr/src/sys/compile/itserv
CPU: 100-MHz Pentium 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory = 67108864 (65536K bytes)
avail memory = 62996480 (61520K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
bt0: Bt956C/ 0-PCI/EISA/VLB(32bit) bus
bt0: reading board settings, busmastering, int=11
bt0: version 4.28A, async only, parity, 32 mbxs, 32 ccbs
bt0: targ 0 async
bt0: targ 1 async
bt0: Using Strict Round robin scheme
bt0 at 0x330 irq 11 on isa
bt0 waiting for scsi devices to settle
(bt0:0:0): "SEAGATE ST15230W 0638" type 0 fixed SCSI 2
sd0(bt0:0:0): Direct-Access 4095MB (8386733 512 byte sectors)
sd0(bt0:0:0): with 3992 cyls, 19 heads, and an average 110 sectors/track
(bt0:1:0): "SEAGATE ST15230W 0638" type 0 fixed SCSI 2
sd1(bt0:1:0): Direct-Access 4095MB (8386733 512 byte sectors)
sd1(bt0:1:0): with 3992 cyls, 19 heads, and an average 110 sectors/track
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <FX001DE/0G 7>, removable, intr, iordis
wcd0: 689Kb/sec, 128Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: no disc inside, unlocked
2 3C5x9 board(s) on ISA found at 0x200 0x300
ep0 at 0x200-0x20f irq 5 on isa
ep0: utp[*UTP*] address 00:a0:24:6c:80:06 irq 5
ep1 at 0x300-0x30f irq 12 on isa
ep1: utp[*UTP*] address 00:a0:24:88:d5:59 irq 12
npx0 on motherboard
npx0: INT 16 interface
pcibus_setup(1): mode1res=0x80000000 (0x80000000), mode2res=0xff (0x0e)
pcibus_setup(2): mode1res=0x80000000 (0x80000000)
pcibus_check: device 0 is there (id=08911060)
Probing for devices on the PCI bus:
configuration mode 1 allows 32 devices.
pci0:0: UMC, device=0x0891, class=bridge (host) [no driver assigned]
vga0 <VGA-compatible display device> rev 0 int a irq 10 on pci0:12
mapreg[10] type=0 addr=f0000000 size=800000.
pci0:13: Bus Logic, device=0x1040, class=storage (scsi) [no driver assigned]
map(10): io(6000)
pci0:18: UMC, device=0x886a, class=bridge (isa) [no driver assigned]
pci0: uses 8388608 bytes of memory from f0000000 upto f07fffff.
changing root device to sd1a
BIOS Geometries:
0:0209fe3f 0..521=522 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03ff3f20 0..1023=1024 cylinders, 0..63=64 heads, 1..32=32 sectors
0 accounted for
sd1s1: type 0xa5, start 32, end = 8386559, size 8386528 : OK
sd0s1: type 0xa5, start 63, end = 8385929, size 8385867 : OK
sd0s1: type 0xa5, start 63, end = 8385929, size 8385867 : OK