ameth
| shepard@ameth.org |
= http://www.ameth.org =
| Administrator, Ameth Technologies |
On Tue, 12 Nov 1996, Uwe Bonnes wrote:
>
> Hallo,
>
> I have been searching the net over and over, but didn't find any usefull
> information about both topics. Seems M*cr*s*ft purchased that technologie
> from Parallel Technologies ...
>
> Anyway, I am looking for information on the cable needed to connect and the
> protocol spoken on that cable with Microsofts Direct Cable Connection.
>
> If anyone can point me to something usefull, I would be gratefull.
>
> The information to build a ECP DCC Cable could be achieved too if
> someone with such a cable would measure with a Ohm-meter which Pins are
> connected.
>
> --
> Uwe Bonnes bon@elektron.ikp.physik.th-darmstadt.de
>
> Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
> --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
>