This is a mixed IDE/SCSI machine with NE2000, soundblaster, IDE CD,
etc. Would be happy to provide any extra information.
cradek@hoser:/proc
% cat cpuinfo
processor : 0
cpu : 586
model : Pentium 75+
vendor_id : GenuineIntel
stepping : 12
fdiv_bug : no
hlt_bug : no
fpu : yes
fpu_exception : yes
cpuid : yes
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic
bogomips : 66.36
processor : 1
cpu : 586
model : Pentium 75+
vendor_id : GenuineIntel
stepping : 12
fdiv_bug : no
hlt_bug : no
fpu : yes
fpu_exception : yes
cpuid : yes
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic
bogomips : 66.56
cradek@hoser:/proc/scsi
% cat aic7xxx/0 scsi
Adaptec AIC7xxx driver version: 3.4/3.2/3.1
Compile Options:
AIC7XXX_RESET_DELAY : 15
AIC7XXX_TWIN_SUPPORT : Enabled
AIC7XXX_TAGGED_QUEUEING: Disabled
AIC7XXX_PAGE_ENABLE : Disabled
AIC7XXX_PROC_STATS : Disabled
Adapter Configuration:
SCSI Adapter: AHA-2740
(AIC-777x chipset)
Host Bus: Twin
Base IO: 0x1c00
IRQ: 11
SCBs: Used 2, HW 4, Page 4
Interrupts: 30801 (Level Sensitive)
Serial EEPROM: False
Extended Translation: Disabled
SCSI Bus Reset: Enabled
Ultra SCSI: Disabled
Target Disconnect: Enabled
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: TOSHIBA Model: MK537FB/ Rev: 6258
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: MICROP Model: 4110-09TBCU0322J Rev: HT01
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: MICROP Model: 1528-15MD1066702 Rev: DD24
Type: Direct-Access ANSI SCSI revision: 01 CCS
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: HP Model: HP35470A Rev: 1009
Type: Sequential-Access ANSI SCSI revision: 02