[PATCH rtw-next v2 2/3] wifi: rtl8xxxu: honour the retry count of injected frames on gen1 chips

From: Ahmet Zeren via B4 Relay

Date: Sun Nov 22 2026 - 00:59:49 EST


From: Ahmet Zeren <niko3x@xxxxxxxxx>

max_rate_tries is never set, so mac80211 clamps the retry count of every
injected frame to zero and the radiotap retries field has no effect.
Injected frames also ignore IEEE80211_TX_CTL_NO_ACK and use the default
hardware retry limit of 48. Unicast frames to an absent station then
take seconds each, which stalls all injection behind them.

Advertise the 6-bit retry limit of the TX descriptor, and on gen1 chips
program the retry limit of injected frames: none when no ACK is
expected, otherwise the radiotap retry count.

Tested on RTL8192CU (0bda:8178): 40 unicast frames at 1 Mbps to an
absent station drain in ~0.13 s with NOACK or 0 retries, ~0.45 s with
2, ~1.1 s with 4 and ~3.3 s with 6 retries. Without this patch the same
frames had not drained after 100 s, even with NOACK.

Signed-off-by: Ahmet Zeren <niko3x@xxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/core.c | 29 +++++++++++++++++++++++-
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/core.c b/drivers/net/wireless/realtek/rtl8xxxu/core.c
index 3b77a7ce884..7d6f5243f64 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/core.c
@@ -5241,6 +5241,24 @@ static bool rtl8xxxu_tx_rate_inject(struct ieee80211_tx_info *tx_info,
return true;
}

+/*
+ * Retry limit of an injected frame: none if no ACK is expected, else the
+ * radiotap retry count. -1 leaves it to the hardware.
+ */
+static int rtl8xxxu_tx_retry_inject(struct ieee80211_tx_info *tx_info)
+{
+ if (!(tx_info->flags & IEEE80211_TX_CTL_INJECTED))
+ return -1;
+
+ if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
+ return 0;
+
+ if (tx_info->control.flags & IEEE80211_TX_CTRL_RATE_INJECT)
+ return tx_info->control.rates[0].count - 1;
+
+ return -1;
+}
+
/*
* Fill in v1 (gen1) specific TX descriptor bits.
* This format is used on 8188cu/8192cu/8723au
@@ -5258,9 +5276,11 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u32 rate = 0;
u16 seq_number;
+ int retries;
bool inject;

inject = rtl8xxxu_tx_rate_inject(tx_info, &rate, &sgi);
+ retries = rtl8xxxu_tx_retry_inject(tx_info);

if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
dev_info(dev, "%s: TX rate: %d, pkt size %u\n",
@@ -5283,7 +5303,13 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
if (ieee80211_is_mgmt(hdr->frame_control)) {
tx_desc->txdw5 = cpu_to_le32(rate);
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
- tx_desc->txdw5 |= cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT);
+ if (retries < 0)
+ retries = 6;
+ }
+
+ if (retries >= 0) {
+ tx_desc->txdw5 |= le32_encode_bits(retries,
+ TXDESC32_RETRY_LIMIT_MASK);
tx_desc->txdw5 |= cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE);
}

@@ -7975,6 +8001,7 @@ static int rtl8xxxu_probe(struct usb_interface *interface,
SET_IEEE80211_PERM_ADDR(hw, priv->mac_addr);

hw->extra_tx_headroom = priv->fops->tx_desc_size;
+ hw->max_rate_tries = TXDESC32_RETRY_LIMIT_MAX + 1;
ieee80211_hw_set(hw, SIGNAL_DBM);

/*
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index 8cbadcf7190..8f75be83e9e 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -575,6 +575,7 @@ struct rtl8xxxu_txdesc40 {
#define TXDESC32_RETRY_LIMIT_ENABLE BIT(17)
#define TXDESC32_RETRY_LIMIT_SHIFT 18
#define TXDESC32_RETRY_LIMIT_MASK 0x00fc0000
+#define TXDESC32_RETRY_LIMIT_MAX 63

/* Word 6 */
#define TXDESC_MAX_AGG_SHIFT 11

--
2.56.1