[PATCH v4 05/11] spi: spi-mem: Take the controller DQS support into account

From: Miquel Raynal

Date: Fri Nov 20 2026 - 12:15:07 EST


Require the controller to advertise DQS support through the new
mem_caps.dqs capability. A controller that cannot use the strobe would
otherwise leave the memory driving a signal that is ignored, which costs
power and EMC pollution.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
drivers/spi/spi-mem.c | 8 ++++++--
include/linux/spi/spi-mem.h | 2 ++
2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index f2e1ecd49fd6..c07156e22ccd 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -571,11 +571,15 @@ EXPORT_SYMBOL_GPL(spi_mem_set_dqs_pin_available);
* @mem: the SPI memory
*
* Return: a boolean indicating whether the DQS signal is usable or not. DQS is
- * usable when the memory supports it and the line is wired.
+ * usable when the memory supports it, the line is wired and the controller is
+ * capable of using it.
*/
bool spi_mem_dqs_is_usable(struct spi_mem *mem)
{
- return mem->dqs_pin && mem->dqs_wired;
+ struct spi_controller *ctlr = mem->spi->controller;
+
+ return mem->dqs_pin && mem->dqs_wired &&
+ spi_mem_controller_is_capable(ctlr, dqs);
}
EXPORT_SYMBOL_GPL(spi_mem_dqs_is_usable);

diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 73fab3b004b5..ad438816eebb 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -405,6 +405,7 @@ struct spi_controller_mem_ops {
* is a pause in the transfer (eg. internal bus contention or
* DMA arbitration on an interconnect). Features such as NAND
* continuous reads shall not be leveraged.
+ * @dqs: The controller can use the DQS signal provided by the memory
*/
struct spi_controller_mem_caps {
bool dtr;
@@ -413,6 +414,7 @@ struct spi_controller_mem_caps {
bool per_op_freq;
bool secondary_op_tmpl;
bool no_cs_assertion;
+ bool dqs;
};

#define spi_mem_controller_is_capable(ctlr, cap) \

--
2.56.0