Re: [PATCH v3 0/5] Enable DSP device for i.MX8ULP

From: Mathieu Poirier

Date: Fri Nov 20 2026 - 11:04:04 EST


On Wed, Nov 11, 2026 at 11:18:03AM +0800, shengjiu.wang@xxxxxxxxxxx wrote:
> From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
>
> The debug reset control is one of the HIFI4 DSP’s reset mechanisms used
> by the debug interface; add documentation for the optional debug reset
> controls and update the driver to use both the soft reset and debug reset
> controller APIs (the soft reset is already documented).
>
> Add a HiFi4 DSP node and enable the DSP on i.MX8ULP.
>
> Changes in v3
> - Split the previous patch 1/4 into two patches
> - Update the commit message to explain why the reset properties are
> required for i.MX8ULP
> - Update the commit message of patch 3/5 to clarify the switch from
> direct register access to the reset controller API
>
> Changes in v2:
> - Update commit messages for all patches
> - Require the reset properties for the i.MX8ULP HiFi4 DSP in patch 1/4,
> as suggested by Sashiko
> - Use sim_lpav as the clock provider for the ipg, ocram, and core clocks in
> patch 3/4, as suggested by Sashiko
> - Rename the reserved-memory node from dsp_reserved to memory in patch 4/4,
> as suggested by Sashiko
>
> Shengjiu Wang (5):
> dt-bindings: dsp: fsl,dsp: document debug reset control
> dt-bindings: dsp: fsl,dsp: require resets for i.MX8ULP
> remoteproc: imx_dsp_rproc: use reset controller for i.MX8ULP
> arm64: dts: imx8ulp: add HiFi4 DSP node
> arm64: dts: imx8ulp-evk: Enable HiFi4 DSP
>

I have applied the first 3 patches of this set. The remaining two will have to
be picked-up by Frank or Sascha.

Thanks,
Mathieu

> .../devicetree/bindings/dsp/fsl,dsp.yaml | 4 +
> arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 34 +++++++++
> arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 23 ++++++
> drivers/remoteproc/imx_dsp_rproc.c | 76 +++++--------------
> 4 files changed, 82 insertions(+), 55 deletions(-)
>
> --
> 2.34.1
>