Re: [PATCH net-next v12 07/13] net: dsa: realtek: rtl8365mb: set and get vlan 4k for family D
From: Gustavo Foletto Mora
Date: Fri Nov 20 2026 - 09:17:23 EST
On a TP-Link EX511 v2 (RTL8367S-VB, CPU port 6 over 1G SGMII to an
IPQ5018), on 6.18.44 with the rtl8365mb DCB QoS series from net-next and
v12 applied as is (the same code as v12-pre5 in OpenWrt PR #19644):
- Live vlan_filtering toggle on a bridge with a VLAN in use: IVL/SVL
changes at once in both directions. After 1 -> 0 the hosts are learned
without a VID, and static and group entries with VID 0 steer, drop and
restrict as expected; after 0 -> 1 they are learned with the VID again,
and entries with the VID behave as expected. Each toggle that flips the
switch-wide state took 20 to 30 ms.
- The rollback added in v12 is an error path I could not provoke here.
The rest of the series passes my regression test on this board as with
v11: VLAN-aware and VLAN-unaware bridges, PVIDs, isolation, FDB and MDB
entries, flooding flags, load, no driver warnings and no port errors. The
QoS baseline programmed at setup did not change any of it; QoS itself was
not tested (CONFIG_DCB is not set in this build).
Tested-by: Gustavo Foletto Mora <gusfmora@xxxxxxxxx>
Thanks,
Gustavo