Re: [PATCH] HID: quirks: add ALWAYS_POLL for ASUS ProArt MD301 mouse
From: Jiri Kosina
Date: Thu Nov 19 2026 - 16:22:16 EST
On Fri, 13 Nov 2026, Lukasz Leczkowski via B4 Relay wrote:
> From: Lukasz Leczkowski <lukileczo@xxxxxxxxx>
>
> In mouse firmware version 0.00.31 and receiver 0.00.20, the receiver
> of the ASUS ProArt MD301 mouse (0b05:1cd3) delays button events
> by up to ~500 ms.
>
> The receiver exposes five HID interfaces. Besides the keyboard and mouse
> interfaces, interface 4 (vendor usage page 0xffc1) carries a copy of
> every button and wheel event as a 64-byte vendor report. As this
> interface has no input handlers, usbhid does not poll its interrupt-IN
> endpoint unless userspace opens the hidraw node. The firmware appears to
> hold back the mouse report on interface 1 until the vendor report has
> been read or some timeout expires.
>
> Add HID_QUIRK_ALWAYS_POLL for the receiver so that all of its endpoints
> are polled continuously.
>
> The issue was analysed with the help of Claude Code (Claude Opus 5.5),
> which captured the raw HID reports, identified the unpolled vendor
> interface and drafted this patch.
>
> Tested on 7.3.0 with this patch applied;
> clicks are delivered immediately and double-clicks work again.
>
> Signed-off-by: Lukasz Leczkowski <lukileczo@xxxxxxxxx>
Applied, thanks.
--
Jiri Kosina
SUSE Labs