[PATCH v4 0/3] arm64: dts: allwinner: add A733/Cubie A7S support
From: Enzo Adriano
Date: Thu Nov 19 2026 - 13:09:29 EST
This series adds the initial Allwinner A733 and Radxa Cubie A7S device
trees for UART0, the AXP318W PMIC and 3.3 V microSD.
Base: sunxi/for-next (03b3355ed7a39b4416f0d0a39061479b1aa13196).
Previous posting (v3):
https://lore.kernel.org/r/cover.1794227241.git.enzo.adriano.code@xxxxxxxxx
Changes in v4:
- 1/3: Carry Alexander Sverdlin's Reviewed-by.
- 2/3: Add a one-cluster CPU map and A55/A76 PMUs on PPI 7, using
GIC ppi-partitions. Change #interrupt-cells from 3 to 4 and add a
fourth cell to every GIC interrupt specifier. Drop Vinicius Pedrosa's
Tested-by because of the interrupt encoding change.
- 3/3: Sort root nodes and put status last. Move boot history below ---.
Runtime dependencies in application order:
[1] AXP318W PMIC v8
https://lore.kernel.org/r/20260910-axp318-regulator-v8-0-e906a61a7f3d@xxxxxxxxxxxx
[2] Pinctrl IRQ-bank v3
https://lore.kernel.org/r/20261025142412.112216-1-pmazzini@xxxxxxxxx
[3] A733 8250_dw v2, patches 1-4
https://lore.kernel.org/r/cover.1792439398.git.vinicius.eduardo.pedrosa@xxxxxxxxx
[4] Firmware-clock v2 for vendor-firmware warm reboot
https://lore.kernel.org/r/20261112-a733-fwclk-v2@xxxxxxxxx
[5] Pinctrl voltage-mode v3
https://lore.kernel.org/r/20261109-a733-pinctrl-v3@xxxxxxxxx
A7S DTB/schema checks need [1] 3/5, [2] 2/3 and [3] 3/4 before v4.
Validation: clean git am, arm64 defconfig Image, arm/sunxi.yaml binding
check and warning-free A7S W=2 CHECK_DTBS=y. The compiled DTB has one
eight-core cluster and two disjoint PMU partitions.
A November 18 RAM boot on Cubie A7S with vendor firmware used the base
and runtime dependencies above. Two context-only adaptations were needed:
PMIC v8 regulator allocation context and pinctrl voltage-mode v3 IRQ-bank
map context. CPUs 0-7 came online in one cluster. The A55 PMU covered
CPUs 0-5 and the A76 PMU CPUs 6-7; cycles and instructions counted and
PPI 7 overflow samples were observed on each CPU. The timer, console,
AXP318W probe and MMC0 read-only transfers worked; warm reboot returned
to vendor Linux unaided.
Untested: PMIC/NMI interrupt delivery, card writes, hotplug, suspend,
power-off, CPU capacity, 1.8 V switching, other UART/I2C and storage
instances, RTC alarms, EL2/ITS/MSI, and physical BLDO2 voltage.
Enzo Adriano (3):
dt-bindings: arm: sunxi: document Radxa Cubie A7S
arm64: dts: allwinner: add A733 SoC description
arm64: dts: allwinner: add Radxa Cubie A7S board
.../devicetree/bindings/arm/sunxi.yaml | 5 +
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun60i-a733-cubie-a7s.dts | 287 ++++++++
.../arm64/boot/dts/allwinner/sun60i-a733.dtsi | 657 ++++++++++++++++++
4 files changed, 950 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun60i-a733-cubie-a7s.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun60i-a733.dtsi
base-commit: 03b3355ed7a39b4416f0d0a39061479b1aa13196