[PATCH v8 8/9] dmaengine: dw-axi-dmac: require an IRQ before registering the controller
From: James Hilliard
Date: Thu Nov 19 2026 - 11:02:25 EST
If the interrupt controller is not ready, the DMA driver can bind
without an IRQ handler. Clients can then submit transfers but never
receive completion callbacks. platform_irq_count() returns -EPROBE_DEFER
in this case, which skips the IRQ request loop just like a zero count.
Propagate the error so the driver core retries probe when the IRQ
provider is ready. Return -ENXIO if there are no IRQs.
Fixes: e32634f466a9 ("dma: dw-axi-dmac: support per channel interrupt")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: James Hilliard <james.hilliard1@xxxxxxxxx>
---
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 2eeb902eaad3..531705f8f89b 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -1518,6 +1518,10 @@ static int axi_req_irqs(struct platform_device *pdev, struct axi_dma_chip *chip)
int irq_count = platform_irq_count(pdev);
int ret;
+ if (irq_count <= 0)
+ return dev_err_probe(chip->dev, irq_count ?: -ENXIO,
+ "failed to get controller IRQs\n");
+
for (int i = 0; i < irq_count; i++) {
chip->irq[i] = platform_get_irq(pdev, i);
if (chip->irq[i] < 0)
--
2.53.0