Re: [PATCH v3 1/2] arm64: dts: qcom: talos: Add graph port placeholders for USB Type-C muxing
From: Dmitry Baryshkov
Date: Wed Nov 18 2026 - 09:21:59 EST
On Mon, Nov 16, 2026 at 05:36:22PM +0530, Akash Kumar wrote:
> From: Akash Kumar <akakum@xxxxxxxxxxxxxxxx>
>
> Add empty port/endpoint nodes on the primary USB QMP PHY (usb_qmpphy)
> and the usb_1/usb_2 dwc3 controllers, along with orientation-switch on
> the PHY. These placeholders let board files wire up a USB-C PD
> controller's HS/SS endpoints directly via
> &label { remote-endpoint = <...>; }; instead of redeclaring the
> port/ports structure on the shared nodes.
>
> Signed-off-by: Akash Kumar <akakum@xxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/talos.dtsi | 35 +++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
> index 1d74e459f892..04636fd88807 100644
> --- a/arch/arm64/boot/dts/qcom/talos.dtsi
> +++ b/arch/arm64/boot/dts/qcom/talos.dtsi
> @@ -5078,7 +5078,21 @@ usb_qmpphy: phy@88e6000 {
>
> #phy-cells = <0>;
>
> + orientation-switch;
> +
> status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_qmpphy_out: endpoint {
> + };
> + };
> + };
> };
>
> usb_qmpphy_2: phy@88e8000 {
> @@ -5163,7 +5177,21 @@ usb_1: usb@a600000 {
> wakeup-source;
> dma-coherent;
>
> + usb-role-switch;
> +
> status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_1_dwc3_hs: endpoint {
> + };
Missing SS port.
> + };
> + };
> };
>
> usb_2: usb@a800000 {
> @@ -5220,7 +5248,14 @@ usb_2: usb@a800000 {
> wakeup-source;
> dma-coherent;
>
> + usb-role-switch;
> +
> status = "disabled";
> +
> + port {
> + usb_2_dwc3_hs: endpoint {
> + };
> + };
> };
>
> tsens0: thermal-sensor@c263000 {
> --
> 2.43.0
>
--
With best wishes
Dmitry