[PATCH 1/2] dt-bindings: iio: Support ROHM BD79111
From: Matti Vaittinen
Date: Wed Nov 18 2026 - 09:19:32 EST
From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
ROHM BD79111 is very similar to the BD79112. Both are ADC/GPIO devices,
where pins can be configured to be either used as GPIO or ADC inputs.
ADCs are 12-bit SAR ADCs and GPIOs support input/output but not being IRQ
sources.
The main difference is amount of channels/GPIOs. The BD79112 has 32 pins
for this use, the BD79111 has 16. Furthermore, the BD79111 data-sheet
promises 0.5 MSPS sample rate with maximum of 10 MHz SPI clock, whereas
the BD79112 data-sheet mentioned 1MSPS rate with maximum of 20 MHz SPI
clock.
Signed-off-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
---
Note, I had to change the 'root-level' additionalProperties: false to
unevaluatedProperties: false in order to allow the properties in the new
allOf:
- if:
...
section. It seems to me this is what a few other bindings in IIO do, but
I suppose it makes this "less strict". Well, since I am terrible with
writing bindings, I'd better point this out and ask if it's ok, or if
there are better way(s) to handle this?
---
.../bindings/iio/adc/rohm,bd79112.yaml | 72 +++++++++++++------
1 file changed, 50 insertions(+), 22 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/rohm,bd79112.yaml b/Documentation/devicetree/bindings/iio/adc/rohm,bd79112.yaml
index aa8b07c3fac1..4f105124ee6f 100644
--- a/Documentation/devicetree/bindings/iio/adc/rohm,bd79112.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/rohm,bd79112.yaml
@@ -4,18 +4,21 @@
$id: http://devicetree.org/schemas/iio/adc/rohm,bd79112.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: ROHM BD79112 ADC/GPO
+title: ROHM BD79111 and BD79112 ADC/GPIO
maintainers:
- Matti Vaittinen <mazziesaccount@xxxxxxxxx>
description: |
- The ROHM BD79112 is a 12-bit, 32-channel, SAR ADC. ADC input pins can be
- also configured as general purpose inputs/outputs. SPI should use MODE 3.
+ The ROHM BD79112 is a 12-bit, 32-channel, SAR ADC. The ROHM BD79111 is
+ a 12-bit, 16-channel, SAR ADC. ADC input pins can be also configured as
+ general purpose inputs/outputs. SPI should use MODE 3.
properties:
compatible:
- const: rohm,bd79112
+ enum:
+ - rohm,bd79111
+ - rohm,bd79112
reg:
maxItems: 1
@@ -37,23 +40,6 @@ properties:
"#size-cells":
const: 0
-patternProperties:
- "^channel@([0-9]|[12][0-9]|3[01])$":
- type: object
- $ref: /schemas/iio/adc/adc.yaml#
- description: Represents ADC channel. Omitted channels' inputs are GPIOs.
-
- properties:
- reg:
- description: AIN pin number
- minimum: 0
- maximum: 31
-
- required:
- - reg
-
- additionalProperties: false
-
required:
- compatible
- reg
@@ -62,7 +48,49 @@ required:
- spi-cpha
- spi-cpol
-additionalProperties: false
+unevaluatedProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rohm,bd79112
+ then:
+ patternProperties:
+ "^channel@([0-9]|[12][0-9]|3[01])$":
+ type: object
+ $ref: /schemas/iio/adc/adc.yaml#
+ description: Represents ADC channel. Omitted channels' inputs are GPIOs.
+
+ properties:
+ reg:
+ description: AIN pin number
+ minimum: 0
+ maximum: 31
+
+ required:
+ - reg
+
+ additionalProperties: false
+ else:
+ # BD79111 has only 16 channels
+ patternProperties:
+ "^channel@([0-9]|1[0-5])$":
+ type: object
+ $ref: /schemas/iio/adc/adc.yaml#
+ description: Represents ADC channel. Omitted channels' inputs are GPIOs.
+
+ properties:
+ reg:
+ description: AIN pin number
+ minimum: 0
+ maximum: 15
+
+ required:
+ - reg
+
+ additionalProperties: false
examples:
- |
--
2.56.1
Attachment:
signature.asc
Description: PGP signature