[PATCH 2/9] dt-bindings: embedded-controller: Add SpacemiT K3 EC window
From: Wang Yang
Date: Wed Nov 18 2026 - 03:58:14 EST
Describe the K3-specific non-linear peripheral window in a vendor
binding. Reuse the existing EC keyboard schema and keep the Google EC
binding unchanged. Point the vendor controller child schema at this
binding.
Signed-off-by: Wang Yang <yang.wang@xxxxxxxxxxxxxxxx>
---
.../bindings/bus/spacemit,k3-espi.yaml | 2 +-
.../spacemit,k3-cros-ec.yaml | 58 +++++++++++++++++++
2 files changed, 59 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/embedded-controller/spacemit,k3-cros-ec.yaml
diff --git a/Documentation/devicetree/bindings/bus/spacemit,k3-espi.yaml b/Documentation/devicetree/bindings/bus/spacemit,k3-espi.yaml
index 30985ee0a..545cc2609 100644
--- a/Documentation/devicetree/bindings/bus/spacemit,k3-espi.yaml
+++ b/Documentation/devicetree/bindings/bus/spacemit,k3-espi.yaml
@@ -112,7 +112,7 @@ properties:
patternProperties:
'^ec@[0-9a-f]+$':
- $ref: /schemas/embedded-controller/google,cros-ec.yaml#
+ $ref: /schemas/embedded-controller/spacemit,k3-cros-ec.yaml#
required:
- compatible
diff --git a/Documentation/devicetree/bindings/embedded-controller/spacemit,k3-cros-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/spacemit,k3-cros-ec.yaml
new file mode 100644
index 000000000..971e7b32d
--- /dev/null
+++ b/Documentation/devicetree/bindings/embedded-controller/spacemit,k3-cros-ec.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/embedded-controller/spacemit,k3-cros-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC on the SpacemiT K3 peripheral window
+
+maintainers:
+ - Wang Yang <yang.wang@xxxxxxxxxxxxxxxx>
+
+description: |
+ The embedded controller implements ChromeOS EC host commands through the
+ memory-mapped peripheral window of the SpacemiT K3 eSPI controller. The
+ window uses a non-linear LPC register layout. Offset 0x00 provides host
+ command writes and status reads; offset 0x01 provides host data/results.
+ Protocol v2 arguments and parameters are at 0x10 and 0x18, protocol v3
+ packets at 0x100, and the EC memory map at 0x200. This programming interface
+ is distinct from an EC connected to an ordinary SPI controller.
+
+properties:
+ compatible:
+ const: spacemit,k3-cros-ec
+
+ reg:
+ maxItems: 1
+ description: EC peripheral memory window, at least 0x300 bytes.
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source: true
+
+ keyboard-controller:
+ $ref: /schemas/input/google,cros-ec-keyb.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ec@0 {
+ compatible = "spacemit,k3-cros-ec";
+ reg = <0x0 0x1000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <1 11 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
--
2.43.0