[PATCH v8 0/5] HID: intel-thc-hid: intel-ipts: support THC IPTS ports

From: Emfox Zhou

Date: Wed Nov 18 2026 - 01:57:40 EST


The THC ports on Tiger Lake, Lakefield, Alder Lake and Raptor Lake run in
IPTS mode: plain SPI with a private framing instead of HIDSPI, which is
all intel-thc-hid handles today. This adds a backend for them next to
intel-quickspi and intel-quicki2c, on top of the same core.

It is based on v7.4-rc3 with two core fix series applied, both still
under review:

https://lore.kernel.org/r/20261118053132.253448-1-emfox@xxxxxxxxxx
https://lore.kernel.org/r/20261117105420.318995-1-emfox@xxxxxxxxxx

One gives the DMA engines a lifetime, the other keeps a PRD table from
overrunning after a reset, and the recovery path here relies on both.
They overlap in intel-thc-dma.c: apply the first, then the second.

Register, DMA and interrupt work goes through the exported intel-thc API,
except in four places where the core has no call for it: the reset,
port-supported and quiesce-state bits of THC_M_PRT_CONTROL are accessed
directly. Nothing outside the new directory changes except Kconfig and
Makefile.

The hardware facts - port IDs, configuration block layout, frame codes and
header sizes - come from the ithc driver linux-surface ships, at
https://github.com/quo/ithc-linux 6d53c9c (dual licensed GPL-2.0 /
BSD-2-Clause); no code is taken from it. The layout, the frame format and
the ordering between quiesce, interrupt configuration and the DMA engines
are the parts most likely to need scrutiny; each is argued in the commit
message that relies on it. All of it was confirmed on a Surface Pro 8 with
a 045e:0c37 controller.

The first four patches each leave a state that builds and loads: port
bring-up, DMA and interrupts, HID registration, system sleep. The fifth
documents the frame format and the IPTS handshake.

Link to v7: https://lore.kernel.org/r/20261118054004.363766-1-emfox@xxxxxxxxxx

Changes in v8:

- A request from the threaded handler is refused by comparing the caller
with that thread, not through a device-wide flag.

- The reset count a feature answer is checked against is sampled after
the request is written.

- The line is masked again after synchronize_irq() in the recovery path,
and the thread no longer reopens it during a teardown.

Emfox Zhou (5):
HID: intel-thc-hid: intel-ipts: bring up the port
HID: intel-thc-hid: intel-ipts: receive reports
HID: intel-thc-hid: intel-ipts: add the HID device
HID: intel-thc-hid: intel-ipts: handle system sleep
HID: intel-thc-hid: intel-ipts: document the IPTS mode

Documentation/hid/intel-thc-hid.rst | 109 +-
drivers/hid/intel-thc-hid/Kconfig | 14 +
drivers/hid/intel-thc-hid/Makefile | 4 +
drivers/hid/intel-thc-hid/intel-ipts/ipts.c | 982 ++++++++++++++++++
drivers/hid/intel-thc-hid/intel-ipts/ipts.h | 201 ++++
.../hid/intel-thc-hid/intel-ipts/pci-ipts.c | 193 ++++
6 files changed, 1502 insertions(+), 1 deletion(-)
create mode 100644 drivers/hid/intel-thc-hid/intel-ipts/ipts.c
create mode 100644 drivers/hid/intel-thc-hid/intel-ipts/ipts.h
create mode 100644 drivers/hid/intel-thc-hid/intel-ipts/pci-ipts.c


base-commit: aebb7274476403040d582c61478df8f4a7bf9cd3