Re: [PATCH v2 15/17] riscv: dts: spacemit: k3-pico-itx: enable the DisplayPort output
From: Icenowy Zheng
Date: Wed Nov 18 2026 - 01:26:57 EST
在 2026-11-17二的 15:51 -0500,Guodong Xu写道:
> Hi Icenowy,
>
> On Thu, 03 Sep 2026 20:09:42 +0800, Icenowy Zheng wrote:
> > The connector available on the Pico-ITX mainboard isn't a
> > DisplayPort
> > port -- it's a USB Type-C port instead.
>
> Right, it is a Type-C receptacle, and the commit message should say
> so.
>
> > I think you need to model the Type-C port and alt functions of it.
>
> I am not sure that can be done on this board. The redriver/mux in
> front of the receptacle and the PD controller that steers it both
> sit on the EC's own I2C bus, and their interrupt goes to the EC too.
> The SoC has no bus to either chip; all it gets from that side is the
> DP1 HPD line.
The ChromeOS EC firmware exposes some control for a Type-C port, you
can search for `google,cros-ec-typec` and `google,extcon-usbc-cros-ec`
compatible string in arch/arm64/boot/dts for more details.
Although the K3 Pico ITX hardware connects the EC to the SoC with some
not-so-embedded interface (eSPI), which needs to be handled first.
Thanks,
Icenowy
>
> So a usb-c-connector node would have nothing to link to here.
>
> Guodong