[PATCH] platform/x86: ideapad-laptop: Add V14 G2 ITL to ideapad_dytc_v4_allow_table[]

From: Arnav Kapoor

Date: Mon Nov 16 2026 - 12:18:30 EST


The Lenovo V14 G2 ITL (82KA) uses DYTC version 4 for platform profile
control, so ideapad-laptop currently skips it and logs:

DYTC_VERSION 4 support may not work. Pass ideapad_laptop.allow_v4_dytc=Y on the kernel commandline to enable

With allow_v4_dytc=Y, platform_profile registers with low-power,
balanced and performance. Each profile reads back after it is set, no
ACPI errors are logged when switching, and the firmware applies it:
with all CPUs busy on AC power, the sustained package power was about
14 W in low-power, 17 W in balanced and 24 W in performance.

Add the V14 G2 ITL to ideapad_dytc_v4_allow_table[].

Signed-off-by: Arnav Kapoor <kapoorarnav43@xxxxxxxxx>
---
Tested on a V14 G2 ITL (BIOS GGCN55WW) with the 7.0 kernel's
ideapad-laptop and allow_v4_dytc=Y, which takes the same path as this
table entry; the patch itself is build-tested (W=1) on pdx86 for-next.
Package power is the RAPL energy
counter over the last 20 s of a 45 s all-CPU busy loop, on AC, with
60 s of cooldown between profiles. Fn+Q does not switch profiles on
this model.

drivers/platform/x86/lenovo/ideapad-laptop.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/platform/x86/lenovo/ideapad-laptop.c b/drivers/platform/x86/lenovo/ideapad-laptop.c
index 91a8d11c79c5..ebd4bf6c8798 100644
--- a/drivers/platform/x86/lenovo/ideapad-laptop.c
+++ b/drivers/platform/x86/lenovo/ideapad-laptop.c
@@ -1134,6 +1134,13 @@ static const struct dmi_system_id ideapad_dytc_v4_allow_table[] = {
DMI_MATCH(DMI_PRODUCT_VERSION, "IdeaPad 5 15ITL05")
}
},
+ {
+ /* V14 G2 ITL */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "V14 G2 ITL")
+ }
+ },
{}
};


base-commit: a362539b42193dcdb17f8fba40031a515c53885c
--
2.53.0