Re: [PATCH net v2] net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
From: Khalid Aziz
Date: Wed Oct 15 2025 - 11:55:48 EST
On 10/13/25 12:16 PM, I Viswanath wrote:
dev->chipid is used in lan78xx_init_mac_address before it's initialized:
lan78xx_reset() {
lan78xx_init_mac_address()
lan78xx_read_eeprom()
lan78xx_read_raw_eeprom() <- dev->chipid is used here
dev->chipid = ... <- dev->chipid is initialized correctly here
}
Reorder initialization so that dev->chipid is set before calling
lan78xx_init_mac_address().
Fixes: a0db7d10b76e ("lan78xx: Add to handle mux control per chip id")
How did you determine this is the commit that introduced this bug?
From what I can see, commit a0db7d10b76e does not touch lan78xx_reset() function. This bug was introduced when devid was replaced by chipid (commit 87177ba6e47e "lan78xx: replace devid to chipid & chiprev") or even earlier when the order of calls to lan78xx_init_mac_address() and lan78xx_read_reg() was introduced in lan78xx_reset() depending upon if lan78xx_init_mac_address() at that time used devid in its call sequence at the time.
--
Khalid
Signed-off-by: I Viswanath <viswanathiyyappan@xxxxxxxxx>
---
v1:
Link: https://lore.kernel.org/netdev/20251001131409.155650-1-viswanathiyyappan@xxxxxxxxx/
v2:
- Add Fixes tag
drivers/net/usb/lan78xx.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 42d35cc6b421..b4b086f86ed8 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -3247,10 +3247,6 @@ static int lan78xx_reset(struct lan78xx_net *dev)
}
} while (buf & HW_CFG_LRST_);
- ret = lan78xx_init_mac_address(dev);
- if (ret < 0)
- return ret;
-
/* save DEVID for later usage */
ret = lan78xx_read_reg(dev, ID_REV, &buf);
if (ret < 0)
@@ -3259,6 +3255,10 @@ static int lan78xx_reset(struct lan78xx_net *dev)
dev->chipid = (buf & ID_REV_CHIP_ID_MASK_) >> 16;
dev->chiprev = buf & ID_REV_CHIP_REV_MASK_;
+ ret = lan78xx_init_mac_address(dev);
+ if (ret < 0)
+ return ret;
+
/* Respond to the IN token with a NAK */
ret = lan78xx_read_reg(dev, USB_CFG0, &buf);
if (ret < 0)