Re: [PATCH RFC v2 1/3] arm64: dts: qcom: sm8750: Add Iris VPU v3.5
From: Vikash Garodia
Date: Thu Aug 14 2025 - 01:20:17 EST
On 8/14/2025 12:11 AM, Dmitry Baryshkov wrote:
> On Tue, Aug 12, 2025 at 09:01:36PM +0530, Vikash Garodia wrote:
>>
>> On 8/12/2025 8:09 PM, Dmitry Baryshkov wrote:
>>> On Tue, Aug 12, 2025 at 04:21:12PM +0200, Konrad Dybcio wrote:
>>>> On 8/6/25 2:38 PM, Krzysztof Kozlowski wrote:
>>>>> Add Iris video codec to SM8750 SoC, which comes with significantly
>>>>> different powering up sequence than previous SM8650, thus different
>>>>> clocks and resets. For consistency keep existing clock and clock-names
>>>>> naming, so the list shares common part.
>>>>>
>>>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>>>>>
>>>>> ---
>>>>
>>>> [...]
>>>>
>>>>> + iris_opp_table: opp-table {
>>>>> + compatible = "operating-points-v2";
>>>>> +
>>>>> + opp-240000000 {
>>>>> + opp-hz = /bits/ 64 <240000000>;
>>>>> + required-opps = <&rpmhpd_opp_low_svs_d1>,
>>>>> + <&rpmhpd_opp_low_svs_d1>;
>>>>> + };
>>>>> +
>>>>> + opp-338000000 {
>>>>> + opp-hz = /bits/ 64 <338000000>;
>>>>> + required-opps = <&rpmhpd_opp_low_svs>,
>>>>> + <&rpmhpd_opp_low_svs>;
>>>>> + };
>>>>> +
>>>>> + opp-420000000 {
>>>>> + opp-hz = /bits/ 64 <420000000>;
>>>>> + required-opps = <&rpmhpd_opp_svs>,
>>>>> + <&rpmhpd_opp_svs>;
>>>>> + };
>>>>> +
>>>>> + opp-444000000 {
>>>>> + opp-hz = /bits/ 64 <444000000>;
>>>>> + required-opps = <&rpmhpd_opp_svs_l1>,
>>>>> + <&rpmhpd_opp_svs_l1>;
>>>>> + };
>>>>> +
>>>>> + opp-533333334 {
>>>>> + opp-hz = /bits/ 64 <533333334>;
>>>>> + required-opps = <&rpmhpd_opp_nom>,
>>>>> + <&rpmhpd_opp_nom>;
>>>>> + };
>>>>
>>>> There's an additional OPP: 570 MHz @ NOM_L1
>>>>
>>>> +Dmitry, Vikash, please make sure you're OK with the iommu entries
>>>
>>> We still don't have a way to describe it other way at this point.
>>
>> I could validate the extended "iommu-map-masks" proposal. Given that we have a
>
> Was it posted? If not, let's get it ASAP.
iommu-range (+Prakash) is a WIP, which is needed alognwith iommu-map-mask.
>
>> new binding for SM8750 [1] , does it make sense to add iommus min/max as [1,5] ?
>
> Why [1, 5]? It should be [1, 2] or just [1, 1] + your proposal.
[1,2] should be good for the iris device and remaining SIDs can be covered with
device allocated dynamically via iommu-map-mask proposal
>
>> such that later if new property is introduced "iommu-map-mask", it does not
>> break ABI.
>>
>> iommus = <&apps_smmu 0x1940 0>;
>> iommu-map-masks = <0 &apps_smmu 0x1947 1 0>;
>>
>> [1] https://lore.kernel.org/all/20250804-sm8750-iris-v2-1-6d78407f8078@xxxxxxxxxx/
>>
>> Regards,
>> Vikash
>>>
>>>>
>>>> the other properties look OK
>>>>
>>>> Konrad
>>>
>