[PATCH 5/9] arm64: dts: qcom: x1e80100-hp-omnibook-x14: Explicitly enable used audio codecs

[Stephan Gerhold]

Currently, the macro audio codecs are enabled by default in x1e80100.dtsi.
However, they do not probe without the ADSP remoteproc, which is disabled
by default. Also, not all boards make use of all the audio codecs, e.g.
there are several boards with just two speakers. In this case, the
&lpass_wsa2macro is not used.

In preparation of disabling the audio codecs by default in x1e80100.dtsi,
add the missing status lines to explicitly enable the used audio codecs.

Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
index f9ce2a63767c151192b0618ee2154e8d97316c1b..1c8735f39e498f044fe8ebfb915cf500bc4ee531 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -1001,7 +1001,13 @@ touchscreen@10 {
 	};
 };
 
+&lpass_rxmacro {
+	status = "okay";
+};
+
 &lpass_tlmm {
+	status = "okay";
+
 	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
 		pins = "gpio12";
 		function = "gpio";
@@ -1011,12 +1017,22 @@ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
 	};
 };
 
+&lpass_txmacro {
+	status = "okay";
+};
+
 &lpass_vamacro {
 	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
 
 	vdd-micb-supply = <&vreg_l1b_1p8>;
 	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
+&lpass_wsamacro {
+	status = "okay";
 };
 
 &mdss {

-- 
2.50.1